SpectraLink Link 150, Инструкция по установке и эксплуатации

Страница: 31 / 89

SpectraLink Link 150 Installation and Operation
12/28/98 23
6.4 Unregister Wireless Telephones
If the desired line already has a wireless telephone registered to it, follow this procedure to
unregister the wireless telephone.
1. Move the mode switch on the MCU to the REGISTER position. If your system
has more than one MCU, be sure to move the switch on the correct MCU. The
line indicator LEDs now show which lines have wireless telephones registered.
2. Use the STEP button to select the line to be unregistered. The line indicator LED
for a line that has a wireless telephone registered to it will flash with the LED
mainly on.
3. Press the
DELETE
button. The line indicator LED for the selected line will be off
with a short on flash.
4. Register the new wireless telephone or return the mode switch to the NORM
position.
6.5 Program Wireless Telephone Features
PBX and Key Systems provide users with special features such as hold, transfer,
conference, camp on, and speed dial. These features can be accessed via the wireless
telephone, but the telephone system or Link 150 must be programmed to allow access to
these features from the wireless telephone.
•
If your system is connected to your telephone system via analog lines, refer to the
Programming Appendix for Analog System Functions.
•
If your Link 150 is connected to a digital key telephone system or PBX and you have
wireless telephones with a display, refer to the Programming Appendix that deals
specifically with your brand of telephone system.
6.6 Test Wireless Telephones
Verify proper registration and operation of each wireless telephone by performing the
following tests.
•
Press the START key on each wireless telephone. The extension number should clear
and you should hear dial tone. On some digital systems, depending on how the
telephone system is programmed, you may have to select a line to get dial tone.
•
Place a call to each wireless telephone to verify ring, answer, clear transmit, and clear
receive audio.
•
Verify all programmed features on each wireless telephone.
•
Press the END key. The line indictor should turn off.