SpectraLink Link 150, Инструкция по установке и эксплуатации

Страница: 62 / 89

SpectraLink Link 150 Installation and Operation
12/28/98 54
See Assign Intercom or System Access Buttons in the MERLIN LEGEND Programming
Manual for complete instructions.
Assign Lines and Trunks
The technician should assign lines and trunks to buttons 1-7 as needed. See Assign
Trunks or Pools to Telephones in the MERLIN LEGEND Progamming Manual for
complete instructions.
Assign Other Features
The technician should assign features to available buttons (10-15) according to pre-
installation planning. See the MERLIN LEGEND Feature Reference for more
information.
•
Auto Answer Intercom
•
Auto Answer All
The Voice Announce to Busy, Voice Announce from QCC, and Intercom Voice Receive
features should not be turned on.
Users should also be aware that the Personalized Ring feature is not supported on the
wireless telephone.
5. Copy Programming
After the SpectraLink model phone or phones have been programmed, use the Line Copy
command to copy the line assignments to blocks of extensions. Use the Copy Features
command to copy features to blocks of extensions. See the MERLIN LEGEND Feature
Reference for information about which features can be copied.
6. Assign Individual Intercom Lines and Features
After copying common features and line assignments, assign intercom lines and features to
individual wireless telephones as needed. This includes:
•
Assigning Automatic Line Selection
•
Assigning Ringing/Idle Line Preference
•
Assigning features that cannot be copied using Copy Feature.
Note: In Release 4 and later the Copy Features command has been enhanced to copy more
features. Please check the Feature Reference for your system.
The installer can now test the wireless telephones.