SpectraLink Link 150, Инструкция по установке и эксплуатации

Страница: 73 / 89

SpectraLink Link 150 Installation and Operation
12/28/98 65
I. Toshiba Strata

DK Key System
This appendix describes the recommended programming to use the Link 150 Model
MCK-452 or MCK-454 with a Toshiba Strata DK key telephone system. The document
assumes:
•
The system is a Toshiba Strata DK280, DK24, DK96, or DK424
•
The Toshiba Strata system is installed and initialized.
•
A trained Toshiba Strata technician or system administrator will be on site with the
Installer to program the system.
The procedures will help you set up the SpectraLink wireless telephones to operate in a
way that feels familiar and comfortable to users.
1. Toshiba Wiring
The Toshiba Strata uses only two wires of a four-wire interface. When wiring to a
distribution block, skip every second pair. When wiring to modular jacks, use straight-
through phone cords with RJ11 plugs to connect the MCK45x MCU phone lines to the
jacks.
The digital pair is polarity insensitive. If you reverse polarity the system will
still work.
2. Programming Considerations
Before installation, verify the features assigned to the wired telephones to plan the system
and extension programming required for the wireless telephones. If this site used the
System Record Sheets (in the Toshiba Strata Documentation) to record initial
programming, you may want to use the sheets to check existing programming and record
wireless telephone programming.
•
Line Assignment – The wireless telephone supports a total of nine line resources
(including one reserved for Intercom). Which trunks (outside lines) should ring at this
wireless telephone (Ringing Assignments) and which trunk will be selected when the
user goes off-hook (Automatic Preference)? What station numbers will be assigned to
the wireless telephones?
•
Station Hunting – To which alternate station will calls be forwarded when this
wireless telephone is busy or not answered? Should any of the wireless telephones be
designated as the overflow for Incoming CO calls?
•
Group Pickup – To which Pickup Group (if any) is this wireless telephone assigned?
•
Class of Service – Which features controlled by Class of Service should be assigned
or denied for the wireless telephones?