SpectraLink Link 150, Инструкция по установке и эксплуатации

Страница: 35 / 89

SpectraLink Link 150 Installation and Operation
12/28/98 27
8. System Administration
8.1 Troubleshoot Error Codes
When an alarm is detected, the Error LED will light and an alarm code will display on the
MCU’s seven-segment display.
If the error code refers to a Base Station problem, the Base Station LED will indicate
which Base Station has the problem. If more than one Base Station LED is on, the error
code refers to the lowest numbered Base Station with an error. Use the
STEP button to
select another Base Station to display its error code.
Contact SpectraLink Customer Support at (800) 775-5330 (Monday through Friday,
7:00 a.m. to 6:00 p.m. Mountain Time) for additional assistance in troubleshooting your
system.
8.2 Troubleshoot Phone Features
If wireless telephone features are not working properly, disconnect the ephone from the
MCU and plug a wired telephone into the port. The telephone should be the same type as
the emulated telephone. Refer to the appropriate Appendix for your telephone system for
more details.
Test the features on the wired telephone.
•
For analog MCUs, verify that feature access codes and switchhook flash work
correctly.
•
For digital MCUs, verify that features are assigned to the correct buttons and are
working properly. Refer to the appropriate Appendix for button mapping.
Certain four-wire telephones (such as DEFINITY

and MERLIN LEGEND

)
use a different connector on the phone than on the back of the MCU.
Therefore you may need phone cord or an adapter to perform these tests.