SpectraLink Link 150, Инструкция по установке и эксплуатации

Страница: 55 / 89

SpectraLink Link 150 Installation and Operation
12/28/98 47
Two-Wire Interface
The DEFINITY TN2181 circuit pack provides sixteen two-wire digital ports. Use a
straight-through phone cord with RJ11 plugs to connect the MCU phone lines to
DEFINITY modular jacks.
2. Programming Considerations
When planning the parameters for the wireless telephones, consider the following
parameters assigned to the wired telephones.
•
Line Assignment – the Link Wireless Telephone supports a total of six line resources.
Which lines should ring at this wireless telephone (Bridged Call Alerting) and which
lines will be selected when the user goes off-hook (Idle or Alerting Appearance
Preference)?
•
Call Appearances – should this extension number appear on any other telephone
(bridged appearance)? On which sets should it ring (bridged call alerting)?
•
Class of Service – to which Class of Service should wireless telephones be assigned?
•
Coverage – where is this wireless telephone forwarded on busy/no answer?
•
Call Pickup Group – to which group does this wireless telephone or group of
wireless telephones belong?
•
Toll Restrictions – to which Class of Restriction group should the wireless telephones
be assigned?
•
Programmable Buttons – ten programmable buttons are available for lines or
features. Determine which features, if any, should be programmed on the wireless
telephones. These assignments may emulate assignments on the user's wired set.
It will help to identify a wired set that is programmed exactly or close to the way the
wireless telephones should be programmed. This set can be duplicated to copy station
parameters to the wireless telephones.