55
Appendix C. Management Options
This appendix contains the following information about other methods you can use to
take advantage of the RXT-150:
•
Using the Digital Display
, below
•
Interpreting Flash Codes
on page 59
•
Using the Serial Interface
on page 61
Using the
Digital Display
You can use the digital display to
complete a variety of RXT-150 and RXT
media tasks, and to identify the RXT-
150’s IP address.
Return to Default State or Clear the Menu
To clear the menu at any time, press and hold the Select
and
Load/Unload
buttons for approximately one second. Unless there is an error, the drive will
be in ready mode, with the display blank and the blue LED flashing.
Change Display State or Switch Tasks
To change to a specific task, switch to the task’s state by pressing Select, then
pressing the Load/Unload button. Tasks, or states, are indicated by an initial
letter. When a letter displays, you can execute that task.
Select the Task or Displayed State
Press and release the Select button to continue with the task indicated by the
current state.
Digital
Display
Select
Load/
Unload
Figure 6-1
The front panel.
