Chapter 2. Initial Configuration
16
Configuring DHCP Addressing
1.
Type
3
, then press Enter.
The Diagnostics IP Menu appears
below a listing of current network
settings.
2.
Type
4
, then press Enter.
The screen refreshes with the new
information and a new menu.
3.
To save the change, type
S
, then
press Enter.
Configuring Static IP Addressing
1.
Type
3
, then press Enter.
The Diagnostics IP Menu appears
below a listing of current network
settings.
2.
Type
5
, then press Enter; this
displays a prompt at which you can
enter the RXT-150’s IP address.
3.
Type the new IP address, then press Enter; the Diagnostics IP menu refreshes.
4.
Set the subnet mask (choice
6
) in the same fashion.
5.
Set the gateway address (choice
7
) in the same fashion.
6.
To save the change, type
S
, then press Enter.
