Chapter 2. Initial Configuration
15
Option: Setting the IP Address Using the Serial Interface
Navigate the RXT-150’s serial interface by typing, at the prompt provided, the letter or
number corresponding to a menu option, then press the Enter key on your keyboard.
Before Starting the Serial Interface
Before using the serial interface, make sure that:
• You have a properly configured terminal emulator, such as TeraTerm.
(HyperTerminal is not recommended for use with the RXT-150.)
• You have a standard DB9 serial cable.
• The terminal emulation settings are set to:
•
115200 bps
•
8 data bits
•
No parity
•
1 stop bit
•
No flow control
Starting the Serial Interface
1.
Connect the serial cable from the host to the RXT-150.
2.
Use the host to open a
terminal emulation
program, then bring up
a command prompt.
Note that you may need
to press Enter on your
keyboard to display
the command prompt.
3.
At the prompt, type
cnDiagnosticShell
then press Enter.
The RXT Drive Diagnostics
Main Menu displays.
