Specac Atlas Automatic 40 Ton, Руководство пользователя

Страница: 11 / 68

Atlas™ Auto 40T Hydraulic Press
9
in the lead screw. The anvil ( 10 ) is held in the hollow end of the lead
screw using an O-ring from a compression push fit.
The press is supplied filled with hydraulic oil (CL 37, P/N GS15101)
and is ready to use.
Specac would strongly advise that the Atlas™ Auto 40T press packing
materials are retained and not destroyed (if at all possible), for future
transportation should it be required. Using the purpose built packaging
is the safest way of moving and containing the press to minimize for
any possible damage in transit. Replacing an Atlas™ Auto 40T press
in its packaging is the reverse of the procedure described previously.
For any inquiries to Specac regarding the Atlas™ Auto 40T press, the
serial number must be quoted. The serial number is a five digit number
preceded by a letter and it is found on the electrical appliance label
placed on the electrical/motor housing assembly panel at the rear of
the press.