Specac Atlas Automatic 40 Ton, Руководство пользователя

Страница: 23 / 68

Atlas™ Auto 40T Hydraulic Press
21
Illuminates when a program sequence is running.
End program step.
Operation
Powering up the Atlas™ Auto 40T Press
Note: Before switching on the Atlas™ Auto 40T press ensure that
the Safety Guard (5) is in its safe/down position.
When operating the Atlas™ Auto 40T press for the first time ensure
that the power on/off switch (
1 ) on the front panel ( 2 ) is in the off
position. The power switch ( 1 ) has the markings O and I. The switch is
off when O is pressed level with the surface of the panel.
Now connect the Atlas™ Auto 40T press to a suitable electrical supply
using the supplied mains lead and plug. The mains lead is first
connected to the press at the rear into the power socket (
3 ). Then the
plug is connected to the electrical supply and the power is switched on
at the mains. Turn on the Atlas™ Auto 40T press by the power on/off
switch (
1 ) on the front panel ( 2 ). (The indicator I is pressed level with
the surface of the panel). The upper edge of the switch ( 1 ) shows a
green color when in the on position.
Power to the press will also be indicated by illumination of the
electronic Display Screen (
4 ). From start up the display will show the
working software version number and then default to the Operation
Screen. (Please see examples of the Operation Screen from the
Simple Operation Program PZ sequence in Section 6 of this instruction
manual). The Simple Operation Program PZ (zero) will be set as
standard as the Default Program from powering up, unless a
previously created user program has been saved and stored in the
memory for operation via the Options Screen Def. Prog option.