Specac Atlas Automatic 40 Ton, Руководство пользователя

Страница: 36 / 68

User Manual
34
OS8
The “Pump up to” load has been reached and the Hold Time symbol
(the Maintain Load Hold Time function with auto “top up”) illuminates. A
Maintaining Load message is shown. The load will be held until the
release button (
12 ) is pressed.
Note: At this stage (OS8) the tick symbol is also illuminated. By
pressing the tick/accept button ( 16 ) now you have the facility to
increase the “Pump up to” load if desired. This allows you to
increase a set load directly, outside of any custom created
programmed sequence, without having to release any applied
load. This facility
ONLY applies to the PZ simple program.
If the accept button (
16 ) is pressed, the routine to raise the “Pump up
to” load is invoked. (Slider bar as seen at OS5). You can set the new
load by use of the left (
14 ) and right ( 15 ) buttons and then input the
load by pressing the accept button ( 16 ). If the load is to be increased
the press will operate to raise the load and the screen will revert to that
as seen as OS8 with its new “Pump up to” load.
OS9