Specac Atlas Automatic 40 Ton, Руководство пользователя

Страница: 41 / 68

Atlas™ Auto 40T Hydraulic Press
39
From DIR5, program number P4 has been selected. The PGM symbol
has been illuminated and acceptance of this, by pressing the accept
button (
16 ), will take you to the Programming Display Screen. The P#
selected will be loaded as the program number to create in the
programming environment. Any program segment details for this
program will be carried over to the Programming Display Screen. In a
programming sequence, segment details of the original carried over P#
would only be overwritten in memory when Exiting the Programming
Display Screen environment and saving the new program.
3) Programming Screen
If you wish to just operate the Atlas™ Auto 40T press for a simple set
load application with a maintain load time for an unspecified time with
auto “top up” of the load and a fast release function, then the Simple
Operation Program PZ is used. (This program is loaded as standard
when the press is initially powered up). The Atlas™ Auto 40T press
can be programmed for a sequence of up to 10 (ten) segments (S#’s),
to create a particular series of set load applications, specified hold
times (from 0.1 up to 99.9 minutes as a defined hold time or indefinitely
- infinity) and varying load release rates. The maximum number of
programs (P#’s) that can be stored in the Atlas™ Auto 40T press is 6
(six). (PZ (simple program) is always stored).
“Pump up to” Loads
The “Pump up to” loads that can be programmed is dependent upon
the load range and the tonnage steps. For the Atlas™ Auto 40T press
the “Pump up to” load can be a minimum of 4.0 ton to a maximum of
40.0 tons in 0.5 ton steps.
Load Hold Times
The load hold time can be from a range of 0.1 minutes to 99.9 minutes
or indefinitely as a particular timed function. If you wish to hold the load
indefinitely, the infinity symbol is selected when the slide bar for time
selection, when shown in the Menu Bar, is moved towards 0 (zero)
minutes.