Specac Atlas Automatic 40 Ton, Руководство пользователя

Страница: 53 / 68

Atlas™ Auto 40T Hydraulic Press
51
Along the Menu Bar status line are prompts to suggest how to change
any of the parameters from the Options Screen. The left (
14 ) and right
( 15 ) buttons are used to move between the options. Press the accept
button ( 16 ) to allow for access to a particular option to change. For
example if the Language option is illuminated and the accept button
(
16 ) is pressed, the slide bar is shown in the Menu Bar. If English is
already the Language in use pressing of the right button ( 15 ) takes you
successively from English to Italian in the set sequence at 3). When
the Language you wish to use is illuminated press the accept button
(
16 ) again to change. The slide bar disappears and the Menu Bar
changes back to the prompt commands. The Language chosen will be
displayed.
When a particular Option has been changed and you wish to Exit the
Options Screen press the abort/reject button (
13 ). This will take you
back to the Operation Screen.
7. Non-Routine Procedures For The Atlas™
Auto 40T Press
Aborting a Pressing Procedure
Should you wish to cancel or change the procedure after the start
button has been pushed, the pressing routine and program can be
aborted at anytime by pushing the release button (
12 ). (See Failsafe
Operation page 36).
As a safety feature, raising the guard will also abort the cycle and
program but this is not recommended.
Note: The release button (12) should be used at all times to abort
any pressing cycle or program.