Sony ODS-D280F, Руководство по обслуживанию

Страница: 96 / 308

Code Description Error remedy method Refer to section
20-D17 Displacement of cartridge
was detected during vertical
movement to upper direction
of the select mechanism. 1. Eject a cartridge manually.
2. Visually check the cartridge.
• If an abnormality (such as bulge) is
found, do not use the cartridge any lon-
ger.
Tip
For how to handle the defective car-
tridge, contact your local Sony Sales
Office/Service Center.
3. Startup the maintenance menu and perform
LOADER AUTO TEST.
Note
To clear this error, perform LOADER AUTO
TEST
Use another cartridge.
• When this test ends successfully, the
previous cartridge may be defective.
Do not use the previous cartridge any
longer.
Tip
For how to handle the defective car-
tridge, contact your local Sony Sales
Office/Service Center.
• When this test ends abnormally, the
select loader assembly may be defec-
tive.
“1-10. How to Eject the Car-
tridge (ODS-D280F)”
“1-11. How to Eject the Car-
tridge Manually”
“4-10. Select Loader Assembly”
20-D18 Abnormal current was detec-
ted in the up/down motor
during vertical movement to
upper direction of the select
mechanism. 1. Eject a cartridge manually.
2. Visually check the cartridge.
• If an abnormality (such as bulge) is
found, do not use the cartridge any lon-
ger.
Tip
For how to handle the defective car-
tridge, contact your local Sony Sales
Office/Service Center.
3. Startup the maintenance menu and perform
LOADER AUTO TEST.
Note
To clear this error, perform LOADER AUTO
TEST
Use another cartridge.
• When this test ends successfully, the
previous cartridge may be defective.
Do not use the previous cartridge any
longer.
Tip
For how to handle the defective car-
tridge, contact your local Sony Sales
Office/Service Center.
• When this test ends abnormally, the
select loader assembly may be defec-
tive.
“1-11. How to Eject the Car-
tridge Manually”
“4-10. Select Loader Assembly”
“6-4-4. LOADER AUTO
TEST”
20-D1E Displacement of standard
position was detected during
vertical movement to upper
direction of the select mech-
anism. Insert a cartridge and check whether this error oc-
curs again.
If the cartridge cannot be inserted, turn off and on
the drive and then insert the cartridge again.
• When this error occurs again, the select load-
er assembly may be defective.
• When this error no longer occurs, use the unit
as it is.
“4-10. Select Loader Assembly”
Continued
ODS-D280U/ODS-D280F
2-48
1. Press the EJECT button to eject the cartridge.
*1
If the cartridge is not ejected, take the following
measures.
• Turn off and on the drive. Press the EJECT
button after startup to eject the cartridge.
• If the cartridge is not ejected even after this
operation, eject it manually.
2. Visually check the cartridge.
• If an abnormality (such as bulge) is found, do not use the cartridge any longer and go to step 4) in Measures.
Tip
For how to handle the defective cartridge, contact your local Sony Sales Office/Service Center.
3. Insert the same cartridge and check whether this error occurs again.
If the cartridge cannot be inserted, turn off and on the drive and then insert the cartridge again.
• When this error occurs again, go to step 4) in Measures.
• When this error no longer occurs, use the unit as it is.
4. Insert another cartridge and check whether this error occurs again.
• When this error no longer occurs, check the following.
- When this error occurs again by checking shown in step 3) in Measures, the previous cartridge may be
defective. Do not use the previous cartridge any longer.
Tip
For how to handle the defective cartridge, contact your local Sony Sales Office/Service Center.
- When this error no longer occurs by checking shown in step 3) in Measures, use the unit as it is.
• When this error occurs again, the select loader assembly may be defective.
*1: For the ODS-D280F, perform “Eject” operation from the PC (or host device) or press the EJECT button on the rear of the drive to eject the
cartridge.
Note
EJECT button operation or power off/on operation may generate another alarm code.