Sony ODS-D280F, Руководство по обслуживанию

Страница: 122 / 308

Code Description Error remedy method Refer to section
95-510 No data can be read from the
SPI-EEPROM (IC206:
BI-353 (ODS-D280U)/
BF-92 (ODS-D280F)
board). 1. Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2. Turn off and on the power.
―
95-511 An SPI-EEPROM (IC206:
BI-353 (ODS-D280U)/
BF-92 (ODS-D280F) board)
error was detected. 1. Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2. Turn off and on the power.
―
95-512 A BPI-FLASH (IC200:
BI-353 (ODS-D280U)/
BF-92 (ODS-D280F) board)
data error was detected. 1. Turn off and on the power.
2. Upgrade the firmware again.
If this error still remains, the BI-353 board
(ODS-D280U)/BF-92 board (ODS-D280F)
may be defective.
“4-19. BI-353/BF-92 Board”
“7. Firmware Upgrade”
95-513 No data can be written to the
BPI-FLASH (IC200: BI-353
(ODS-D280U)/BF-92
(ODS-D280F) board) during
firmware upgrade. 1. Turn off and on the power.
2. Upgrade the firmware again.
If this error still remains, the BI-353 board
(ODS-D280U)/BF-92 board (ODS-D280F)
may be defective.
“4-19. BI-353/BF-92 Board”
“7. Firmware Upgrade”
95-515 An ID error or version error
on the board was detected
during communication with
the RFID module board. 1. Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2. Turn off and on the power.
• If the same error occurs again, the
RFID module board may be defective.
“10. Diagrams”
95-516 An error was detected during
communication with the
RFID module board. 1. Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2. Turn off and on the power.
• If the same error occurs again, the
RFID module board may be defective.
“10. Diagrams”
95-517 A UID data comparison error
was detected in the cartridge
memory. 1. Eject a cartridge
2. Insert again the ejected cartridge.
• When an same error occurs, go to step
3) in Measures.
3. Insert another cartridge.
• In the case no error occurs:
The ejected cartridge is likely to be
faulty.
• In the case the error occurs:
Drive trouble is likely.
―
95-518 Existence of two or more car-
tridge memory devices was
detected during the cartridge
memory communication
processing. 1. Eject a cartridge
2. Insert again the ejected cartridge.
• When an same error occurs, go to step
3) in Measures.
3. Insert another cartridge.
• In the case no error occurs:
The ejected cartridge is likely to be
faulty.
• In the case the error occurs:
Drive trouble is likely.
―
95-519 The select loader adjustment
value cannot be read from the
SELECT-EEPROM (IC1:
SM-48 board). 1. Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2. Turn off and on the power.
―
95-51B No data can be read from the
SELECT-EEPROM (IC1:
SM-48 board). 1. Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2. Turn off and on the power.
―
Continued
ODS-D280U/ODS-D280F
2-74