Sony ODS-D280F, Руководство по обслуживанию

Страница: 106 / 308

Code Description Error remedy method Refer to section
4D-901 The 5V-SAG detection func-
tion was activated disabling
the system to start. (On side
1) 1. Check the power cable connection.
• Check the power cable for firm con-
nection and damage.
• When the power cable is properly con-
nected, unplug and plug it and then
check whether this situation is im-
proved.
2. Check the power supply to the unit for fluc-
tuation.
Note
If a high-power device is connected to the
same power channel as this unit, power sup-
ply voltage may be unstable depending on
the startup or operation of the device. In this
case, connect the power of this unit inde-
pendently and then check whether this situa-
tion is improved.
3. Check the PP-61 board installation status.
4. Check the flexible flat cable connection be-
tween PP-61 board and BI-353 board (ODS-
D280U)/BF-92 board (ODS-D280F).
• Improper connection (half insertion or
oblique insertion)
• Damage to connectors
• Significant scratches or disconnection
of flexible flat cables
• Damage or contamination at connect-
ing parts (Unplug flexible flat cables.)
5. Check the main base assembly installation
status.
“4-19. BI-353/BF-92 Board”
“4-20. PP-61 Board”
“4-29. Sub Base Assembly”
2-2-4. Error 5X Error Remedy Method
Code Description Error remedy method Refer to section
50-010 BCA area data cannot be
read. 1. Eject a cartridge.
2. Insert another cartridge.
• In the case no error occurs:
The ejected cartridge is likely to be
faulty.
• In the case the error occurs:
A drive fault is likely.
―
50-011 BCA area data is invalid. 1. Eject a cartridge.
2. Insert another cartridge.
• In the case no error occurs:
The ejected cartridge is likely to be
faulty.
• In the case the error occurs:
A drive fault is likely.
―
51-020 PIC area data cannot be read. 1. Eject a cartridge.
2. Insert another cartridge.
• In the case no error occurs:
The ejected cartridge is likely to be
faulty.
• In the case the error occurs:
A drive fault is likely.
―
51-021 PIC area data is invalid. 1. Eject a cartridge.
2. Insert another cartridge.
• In the case no error occurs:
The ejected cartridge is likely to be
faulty.
• In the case the error occurs:
A drive fault is likely.
―
Continued
ODS-D280U/ODS-D280F
2-58
sub