98
21. RA-5A Chassis High Voltage Stage
Testing for Dark Screen
A dark screen with normal sound can be caused by the items listed in Chart 21-3. Use Figure 21-3 of the D board
in conjunction with Chart 21-3 to locate the test points.
Chart 21-3 – Common Causes of a Dark Screen
Cause
Board
Reason
Troubleshooting Procedure
Screen
voltages too
low
Screen
adj. on
Chassis
IK blanking brings all CRT
cathodes high if a screen
voltage is low
Video
blanking
A, B
RGB cathode voltages stay
abnormally high at 200Vdc
No HV
D, A, or G
No HV or too low.
1. Look at each CRT. If there is an IK line at any
CRT, there is HV and deflection. If there is a
line missing, CRT drive is missing from the A
board.
2. The screen control is above the speakers.
Turn one at a time until retrace lines appear
then back off
3. Check for a sample of the HV at CN8016/pin 3
=7.46Vdc if the HV is normal. 0V if there is no
HV.
CN8006/10
D8038
D Bd.
FBT
Convergence ICs
CN8016/pin 3 = 7.46V
CRT screens
IK line
should
always be
present
Figure 21-3 - D Board
Содержание KD-34XBR2 - 34" Hdtv Fd Trinitron Wega
Страница 77: ...74 RA 5A Chassis Board Layout ...
Страница 108: ...APPENDIX ...