Sony HKSR-5803HQ Скачать руководство пользователя

Страница: 152 / 211

152

Error Messages/Warning Messages/Condition Messages

App

endi

NO A3/A4 INPUT

No carrier detected on digital audio input on channels 3 and 4

NO A5/A6 INPUT

No carrier detected on digital audio input on channels 5 and 6.

NO A7/A8 INPUT

No carrier detected on digital audio input on channels 7 and 8.

NO A9/A10 INPUT

No carrier detected on digital audio input on channels 9 and 10.

NO A11/A12 INPUT

No carrier detected on digital audio input on channels 11 and 12.

REC INHIBIT MODE

The menu settings are to a mode inhibiting recording, or the tape
format does not allow recording.

CASSETTE REC INHIBIT MODE

The cassette is set to inhibit recording.

VPID MISMATCH BIT DEPTH

The bit depth specified in the VPID of the input signal does not
match the bit length of the system.

VPID MISMATCH COLOR SPACE

The color space specified in the VPID of the input signal does not
match the color space of the system.

VPID MISMATCH LINK
INFORMATION

The link information specified in the VPID of the input signal does
not match the actual connector connection.

Note

In 3D systems, this warning only appears when 3D is selected in
menu item 922 “VPID Select (3D)”.

INVALID SDI DATA

SDI input signal data is invalid.

NO LTC REPRODUCED

LTC signal not detected on the tape.

AUX SDI NO SDI A INPUT

No signal is input to the AUX INPUT A connector on the HKSR-
5804 board.

AUX SDI NO SDI B INPUT

No signal is input to the AUX INPUT B connector on the HKSR-
5804 board.

AUX SDI INPUT PLL UNLOCK

The PLL of the clock generator on the HKSR-5804 board is not
locked to the signal input from the AUX INPUT A or B connector.

NW TEMPERATURE HIGH

The internal temperature of the PLD on the HKSR-5804 is high.

NW FAN STOP

The cooling fan on the HKSR-5804 has stopped.

NW REC INHIBIT MODE

This unit cannot record while file importing or exporting is in
progress between the web client and this unit.

NO SUPPORTED PB FORMAT

The recording format cannot be played back by this unit.

SYSTEM MISMATCH

The tape cannot be played with the current system settings.

VIDEO PLL UNLOCKED

Video lock generator PLL not locked to the video reference signal.

INPUT AUDIO DATA MISMATCH
32.000K

The input audio frequency is wrong.

INPUT AUDIO DATA MISMATCH
47.056K

The input audio frequency is wrong.

Tele-File MEMORY IS FULL

The remaining capacity of the Tele-File is low, and therefore the
next recording will overwrite old data.

NO AREA FOR Tele-File DATA
ADDITION

There is no space at all in the Tele-File.

INVALID FORMAT Tele-File

Parts of the Tele-File format are wrong.

Tele-File DATA WRITE FAIL

A write to Tele-File error occurred.

NO Tele-File LABEL

The Tele-File could not be recognized, and therefore the cassette is
ejected (HDCAM-SR only).

Tele-File DATA WRITE IS INHIBITED

Recording or editing was started with the Tele-File in overall write
inhibit mode.

Tele-File DATA READ FAIL

A Tele-File read error occurred.

INVALID FORMAT CONVERSION

The settings do not allow format conversion.

NO REFERENCE INFORMATION

Cannot lock because there is no 30 frames/second reference
information in 720/59.94p HD SDI input signals.

Item number

Display

Meaning

Содержание HKSR-5803HQ




















































































































































































































Результаты поиска

Содержание HKSR-5803HQ

Отзывы:

Похожие инструкции для HKSR-5803HQ

Бренды по названию

Популярные бренды

Sony HKSR-5803HQ, Руководство по эксплуатации

Результаты поиска

Содержание HKSR-5803HQ

Отзывы:

Похожие инструкции для HKSR-5803HQ

Бренды по названию

Популярные бренды