Sony HKSR-5803HQ, Руководство по эксплуатации

Страница: 42 / 211

42
4-1 Registering and Storing Menu Settings
C
h
ap
te
r 4
M
e
nu
Se
tt
in
g
s
Recalling menu settings from a VTR
memory bank
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the
[F1]
(VTR BANK) button.
The VTR BANK menu appears in the display.
3
Press the
[F8]
(DIRECTION) button to select the <
direction.
The left cursor bar flashes.
4
Press the cursor R or r button to move the cursor ( B ) to
the number of the VTR memory bank to be recalled.
5
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
To cancel the recalling operation
Press the CLR button.
6
Press the
[F9]
(COPY) button while holding down the
SFT button.
The menu settings are recalled from the selected VTR
memory bank.
When the recalling process has been completed, the
title of the VTR bank appears under CURRENT
SETUP in the display.
7
Press the
[F10]
(EXIT) button.
The SET UP menu appears again.
4-1-5 “Memory Stick” Operations
You can store menu settings in the VTR memory banks
and cue point data to a “Memory Stick” for recall later.
To eject the “Memory Stick”
• When the serial number of this unit is lower than
11001
Raise up the lower control panel, and press the eject button
on the memory card adaptor inserted in the PCMCIA slot.
• When the serial number of this unit is 11001 or
higher
Lift up the lower control panel, push the “Memory Stick”
in, and then pull it out.
For details of opening and closing the control panel, refer
to the Maintenance Manual.
• When inserting the “Memory Stick”, firmly press the
memory card adaptor that accommodates the “Memory
Stick” (serial number: lower than 11001) or the
“Memory Stick” itself (serial number: 11001 or higher)
in as far as it will go.
• The “Memory Stick” recognition status is shown in the
MEMCARD menu. If the “Memory Stick” is not
inserted properly, reinsert it.
• While data is being read from or written to the “Memory
Stick”, the status appears on the screen. During these
operations, do not remove the “Memory Stick”.
• When no directory is found on the inserted “Memory
Stick” for storing the settings of the SRW-5800
(“SRW5800”), the message “CONFIRMATION OF
Notes
PCMCIA card slot
Serial number: lower
than 11001
Serial number: 11001
or higher
Access indicator
“Memory Stick” slot