Sony HKSR-5803HQ, Руководство по эксплуатации

Страница: 21 / 211

21
2-1 Control Panel
Cha
pt
er 2
L
oc
at
ions
and
F
un
c
tion
s
of
P
ar
ts
For details, refer to the Maintenance Manual Volume 1.
Page 1: System status
SY:
Shows the recording system information (signal
standard and tape format).
PB: Shows the information recorded on the tape (signal
standard and tape format) while being played back.
FC: Shows the converted signal standard when an HKSR-
5001 board is installed.
TC: Shows the time code.
Page 2: System status
ACTIVE LINE:
Shows the status of 1080/1035
conversion active line.
1080
t
1080
1035
t
1080(PANEL)
1035
t
1080(CONV): Shows the current conversion
status.
- - - - -: Cannot be converted.
OFF: No conversion done.
DOWN CONV. OUTPUT: Shows the output status of the
down converter.
ACTIVE: Output.
MUTING: No output.
EOS: Appears at the location of the time code for the valid
end of the previous recording.
Page 3: Phase (OUTPUT)
HD SDI OUTPUT ADV.:
Shows the phase of the main
line HD SDI output.
OFF: In phase with reference.
–90H: 90H (HD) advanced with respect to reference.
DOWN CONV. OUTPUT ADV.: Shows the phase of the
down converter output.
OFF: In phase with reference.
–2H: 2H (SD) advanced with respect to reference.
Page 4: Phase (AUDIO)
AUDIO PB OUTPUT ADV.:
Shows the phase of the
audio output signal.
OFF: Output in phase with the video output signal.
–1Frame: Output one frame advanced with respect to
the video output signal.
AUDIO INPUT DELAY: Shows the recording phase of
the audio input signal.
OFF: Recorded in phase with the video output signal.
+1Frame: Recorded one frame delayed with respect to
the video input signal.
AES/EBU & MONITOR OUTPUT: Shows the phase of
the AES/EBU and MONITOR AUDIO outputs.
REF: Output in phase with reference.
FC: In phase with the FC output.
–90H(HD): 90H (HD) advanced with respect to
reference.
–2H(SD): 2H (SD) advanced with respect to
reference.
Page 5: Phase (TC)
TC INPUT DELAY:
Shows the recording phase of the
input time code.
OFF: Recorded in phase with the input video signal.
+1Frame: Recorded one frame delayed with respect to
the input video signal.
LTC OUTPUT: Shows the phase of the output LTC.
LINE: Output in phase with the main line HD SDI
output.
FC: Output in phase with the FC output.
Page 6: Meta data
• HDCAM-SR
META DATA LINE(REC):
Shows the status of the three
lines for metadata recording on this unit.
META DATA LINE(OUT): Shows the status of the three
lines of main HD SDI output into which metadata is
multiplexed.
META DATA LINE(FC): Shows the status of the three
lines of output from an HKSR-5001 board into which
metadata is multiplexed.
META DATA LINE(SD): Shows the status of the three
lines of SD SDI output into which metadata is
multiplexed.
• HDCAM
Shows the L1, L2, DID, and SDID readout from the tape.
The data for L1, L2, DID, and SDID are treated as one
packet and up to three packets are displayed at one time.
Page 7: 3G-SDI
HDSDI IN:
Shows the 3G interface status of the main line
HD SDI input.
HDSDI OUT: Shows the 3G interface status of the main
line HD SDI output.
MON OUT: Shows the 3G interface status of the main
line HD SDI monitor output.
FC OUT: Shows the 3G interface status of the format
converter output when an HKSR-5001 board is
installed.
AUX OUT: Shows the 3G output interface status of the
AUX OUTPUT A/B connectors when an HKSR-
5804 board is installed.
Page 8: Select FPS
TAPE FORMAT:
Shows the playback format of the tape.
ACTUAL FORMAT: Shows the recording format of the
tape recorded with frames per second (Select FPS
mode) specified.
Select FPS: Shows the transportation speed and playback
speed of the tape recorded with Select FPS mode
specified.
Page 10: VPID
Shows the VPID
1)
multiplexed with the input signal
for LINK-A and LINK-B.
1) VPID
A packet standard defined by SMPTE-352M that identifies the format of
multiplexed signals on the SDI.