Sony HKSR-5803HQ Скачать руководство пользователя

Страница: 87 / 211

4-4 CUE Menu

ap
te

r 4

enu

Se
tt

To cancel the formatting operation

Press the CLR button.

Press the

[F1]

(FORMAT T-File) button while holding

down the SFT button.

“COMPLETED” appears in the control panel display.

Prohibiting Tele-File menu operations

Press the ALT/

[F7]

(WRITE PRTEC) buttons.

on:

All Tele-File menu operations are prohibited.

off:

All Tele-File menu operations are permitted.

Changing a title

Press the ALT/

[F3]

(ATTRIB EDIT) buttons.

Press the

button to select TITLE, and then press

the ENTRY button.

Press the cursor

button to select a character.

Press the

[F7]

(SET LETTER) button or the cursor

center button.

The selected character is entered.

Repeat steps

and

to enter more characters.

To enter a space

Press the

[F5]

(SPACE) button.

If you enter a wrong character

Press the

[F6]

(BACK SPACE) button to go back.

Then re-enter the character.

To start the procedure over again

Press the

[F9]

(CANCEL) button to start again.

To change a character

Press the cursor

button to move the cursor to the title

box. Then press the cursor

button to change

the insertion position.

If entered title exceeds the length of the title box

appears to the left or right of the box.

Press the

[F10]

(SAVE/EXIT) button.

The screen that was on before the title was entered is
displayed again.

To change IN/OUT point time data

Use the cursor buttons to move the cursor (

) to the

line where you want to change IN/OUT point time
data.

To move the cursor using the numeric buttons

With the cursor specifying IN or OUT, enter the line
number using the numeric buttons. Then press the

[F9]

(CUENUM POINT) button. The cursor will move to
the line specified by the numeric buttons.

If the cursor (

) is not linked with the cursor buttons,

the cursor (

) will not move when the cursor buttons

are pressed.

Note

Содержание HKSR-5803HQ




















































































































































































































Результаты поиска

Содержание HKSR-5803HQ

Отзывы:

Похожие инструкции для HKSR-5803HQ

Бренды по названию

Популярные бренды

Sony HKSR-5803HQ, Руководство по эксплуатации

Результаты поиска

Содержание HKSR-5803HQ

Отзывы:

Похожие инструкции для HKSR-5803HQ

Бренды по названию

Популярные бренды