Sony HKSR-5803HQ, Руководство по эксплуатации

Страница: 52 / 211

52
4-1 Registering and Storing Menu Settings
C
h
ap
te
r 4
M
e
nu
Se
tt
in
g
s
9
Press the
[F9]
(COPY) button while holding down the
SFT button.
The VTR starts to recall the contents of the
VTRBANK folder on the FTP server (this unit).
After the recalling process is completed, the title of the
VTR bank folder appears under the VTR indication.
Preventing accidental erasure after recalling
settings
Move the cursor (
B
) to the bank number you wish to
save and press ALT/
[F2]
(PROTECT) buttons. A
symbol will appear to the right of the bank number.
10
Press the
[F10]
(EXIT) button.
The SET UP menu appears again.
Recalling a cue point list from the FTP
server (this unit)
Recalling a cue point list from the FTP server (this unit)
replaces the current VTR cue point list with the recalled
data.
1
On the FTP client, access the IP address assigned to
this unit, and copy the file where the settings were
saved (srw5800cue.dat) to the VTRBANK folder.
For details on data compatibility, see “4-1-9
“Memory Stick” Data Compatibility” on page 55.
Note
While the NETWRK menu appears in the display,
copying/erasing a file to/from the FTP server (this
unit) cannot be performed. To do so, exit the
NETWRK menu, and then perform file copy/erasure.
2
Press the SET UP button.
The SET UP menu appears in the display.
3
Press the
[F3]
(NETWRK) button.
The NETWRK menu appears in the display.
4
Press the
[F4]
(SHOW CUESET) button.
The menu for storing cue point lists appears.
When the srw5800cue.dat file containing the cue
point list is not found in the VTRBANK folder on
the FTP server (this unit)
“NO SETUP DATA” appears under the NETWORK
indication.
If this happens, exit the NETWRK menu and copy the
srw5800cue.dat file to the VTRBANK folder on the
FTP server (this unit), or create a default
srw5800cue.dat file in the VTRBANK folder.
For details on data compatibility, see “4-1-9
“Memory Stick” Data Compatibility” on page 55.
For details on creating a default file, see “Creating
VTRBANK default files” on page 53.
Note
The contents of VTRBANK folder are erased when
this unit is turned on.
5
Press the
[F8]
(DIRECTION) button to select the
,
direction.
The right cursor bar flashes.
6
Move the cursor (
B
) to the CUE POINT SET side
using the cursor
T
button and use the cursor
R
or
r
button to move the cursor bar to the cue point set
number to be recalled.
N E T W O R K 0 F O R M A T
D A T A
C U E P O I N T S E T 1 C U R R E N T C U E S E T
M U S I C 1 C M O V I E
( B l a n k ) 2 F ( B l a n k )
( B l a n k ) 3
( B l a n k ) 4
( B l a n k ) 5
( B l a n k ) 6
( B l a n k ) 7
( B l a n k ) 8
F O R M A T
D A T A