manualshive.com logo in svg

Sony HKSR-5803HQ, Руководство по эксплуатации

"Sony HKSR-5803HQ" - это высококачественный аудиоусилитель для улучшения звука. Для правильной установки и использования, скачайте бесплатно Инструкция по установке с manualshive.com. Получите доступ к руководству пользователя для бесперебойного использования этого устройства.

Поделиться
Скачать
background image

10

1-1 Features

  

Ch
apt

er 1  Ov

e

rv

ie

w

With an HD-SD converter board installed, the unit can 
output both D1 SDI and analog composite signals.
Besides audio data is output as digital data multiplexed 
with the HD SDI signal, it is also output via an AES/EBU 
digital interface. Analog data converted from digital data is 
also provided for monitoring.

Advanced recording and playback 
functions

High-quality digital recording

This unit uses a component system to record video signals. 
The 12-channel audio signal is recorded in 48-kHz, 24-bit 
format. A unique and powerful error correction circuit and 
concealment circuit are used in digital signal processing. 
Accurate and stable video signal output is made possible 
by setting and adjusting the internal digital video 
processor.

Record/playback modes

HDCAM-SR format

The following recording and playback formats can be 
selected:
• For recording or playback of a 4:2:2 signal

1920

×

1080:

 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/

59.94i/60i, 50P/59.94P/60P

1280

×

720:

 50P/59.94P

• When the serial number of this unit is lower than 12001

Recording and playback of 1920×1080-pixel pictures in 
50P, 59.94P, or 60P mode require the HKSR-5803HQ 
(option).

• When the serial number of this unit is 12001 or higher

Recording and playback of 1920×1080-pixel pictures in 
50P, 59.94P, or 60P mode are standard and do not 
require the HKSR-5803HQ (option).

• For recording or playback of a 4:4:4 signal

1920

×

1080 (SQ RGB):

 23.98PsF/24PsF/25PsF/

29.97PsF/30PsF, 50i/59.94i/60i

1920

×

1080 (HQ

1)

 RGB):

 23.98PsF/24PsF/25PsF/

29.97PsF/30PsF, 50i/59.94i/60i

2048

×

1080 (HQ

1)

 RGB):

 23.98PsF/24PsF/25PsF

2048

×

1080 (HQ

1)

 XYZ):

 23.98PsF/24PsF/25PsF

2048

×

1556 (HQ

1)

 RGB):

 23.98PsF/24PsF/25PsF

• When the serial number of this unit is lower than 12001

Recording and playback in SQ mode require the HKSR-
5803SQ (option) or HKSR-5803HQ (option).

• When the serial number of this unit is 12001 or higher

Recording and playback in SQ mode are standard and 
the HKSR-5803SQ (option) or HKSR-5803HQ (option) 
is not required.

• Recording and playback in HQ mode require the HKSR-

5803HQ (option).

• To record/playback 2048

×

1080 and 2048

×

1556 signals, 

the serial number of this unit must be 12001 or higher 
and the HKSR-5803HQ (option) is required.

1)

HQ mode

This mode enables higher quality recording and playback than SQ mode 
(440 Mbps).

• Dual-stream (3D) recording and playback
Two independent 4:2:2 or 4:4:4 (RGB 10 bits) signal lines 
can be recorded or played back as a dual stream. Also, the 
output from two independent cameras can be recorded and 
played back as a dual-stream, 3-D signal on a single VTR. 
(Dual-stream recording and playback for 4:4:4 (RGB 
10 bits) signals is only available when the serial number of 
this unit is 12001 or higher.)

Applicable system settings:

4:2:2 signal

1920

×

1080:

 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/

59.94i/60i

1280

×

720:

 50P/59.94P

4:4:4 (RGB 10 bits) signal

1920

×

1080:

 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/

59.954i/60i (SQ mode)

Note

Dual-stream (3D) recording and playback require the 
HKSR-5803HQ (option).

 

Playback compatibility

You can select the following compatibility playback 
functions.
• HDCAM

1920

×

1080: 59.94i/60i/50i/23.98PsF/24PsF/25PsF/

29.97PsF/30PsF

• Digital Betacam

525/59.94i, 625/50i

Note

Digital Betacam playback and HDCAM playback require 
the HKSR-5802 (option).

Double-speed playback/recording

Recordings made with any of the following applicable 
system settings can be played back at double speeds, and 
by adding the playback signal to a dual link output signal, 
3G-SDI output signal, or dual link 3G-SDI output signal, 
the transmission time to a server, etc. can be shortened. 
(3G-SDI only when the serial number of this unit is 11001 
or higher, and dual link 3G-SDI only when the serial 
number of this unit is 12001 or higher.)
When the serial number of this unit is 12001 or higher, 
double speed recording is also possible.

Notes

Notes

Содержание HKSR-5803HQ




















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HKSR-5803HQ

Profile LS901-E1 Instruction Manual preview
LS901-E1
Бренд: Profile Страницы: 6
NXP Semiconductors MIMXRT1160 Hardware Development Manual preview
MIMXRT1160
Бренд: NXP Semiconductors Страницы: 24
3Com Token Ring Getting Started Manual preview
Token Ring
Бренд: 3Com Страницы: 18
Supermicro SC836 X9 User Manual preview
SC836 X9
Бренд: Supermicro Страницы: 24
3Ware 9550SX Series Installation Manual preview
9550SX Series
Бренд: 3Ware Страницы: 4
H3C NIC-FC730i-Mb-2-32G Manual preview
NIC-FC730i-Mb-2-32G
Бренд: H3C Страницы: 37
Isee IGEPv2 BOARD Hardware Reference Manual preview
IGEPv2 BOARD
Бренд: Isee Страницы: 68
TRENDnet TEW-641PC Quick Installation Manual preview
TEW-641PC
Бренд: TRENDnet Страницы: 12
Radio Shack Bluespoon 17-1000 Quick Start Manual preview
Bluespoon 17-1000
Бренд: Radio Shack Страницы: 1
PaloAlto Networks ION 1000 Hardware Reference Manual preview
ION 1000
Бренд: PaloAlto Networks Страницы: 28
Carrier 40VMW005 Installation And Maintenance Instructions Manual preview
40VMW005
Бренд: Carrier Страницы: 18
Qvis 72-8P Series User Manual preview
72-8P Series
Бренд: Qvis Страницы: 233
Hanwha Techwin WISENET XRN-1610 User Manual preview
WISENET XRN-1610
Бренд: Hanwha Techwin Страницы: 88
Goobay 97790 User Manual preview
97790
Бренд: Goobay Страницы: 28
Adeunis RF COMFORT LwM2M User Manual preview
COMFORT LwM2M
Бренд: Adeunis RF Страницы: 68
Johnson Controls TR-9100-8001 Configuration Manual preview
TR-9100-8001
Бренд: Johnson Controls Страницы: 40
ELC dmXLAN node6x User Manual preview
dmXLAN node6x
Бренд: ELC Страницы: 12
Crestron STIRP Installation Instructions preview
STIRP
Бренд: Crestron Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды