manualshive.com logo in svg

Sony HKSR-5803HQ, Руководство по эксплуатации

"Sony HKSR-5803HQ" - это высококачественный аудиоусилитель для улучшения звука. Для правильной установки и использования, скачайте бесплатно Инструкция по установке с manualshive.com. Получите доступ к руководству пользователя для бесперебойного использования этого устройства.

Поделиться
Скачать
background image

13

1-2 Optional Accessories

  Chapt

er 1  Ov

e

rv

ie

w

A full range of editing functions

Two SRW-5800 units can be connected allowing 
automatic or manual assemble and insert editing. The VTR 
also features a full range of editing functions, including 
preview, review, preroll, and the setting or changing of edit 
points.

Quick access to edit points

The following methods are provided for the setting of edit 
points:
• Multi-cuing for up to 100 edit points
• Search dial with shuttle and jog functions
• Direct input through numeric buttons

DMC (Dynamic Motion Control) editing

Using the DT

®

 (Dynamic Tracking) heads, you can play 

back a section of an edit at speeds between –1 and +2 times 
normal speed and store the speed variation in memory for 
later use in automatic editing.

Note

When this unit is used as a player, DMC playback cannot 
be selected for HDCAM-SR format.

Split editing

In insert mode, audio and video edit points can be set 
separately.

Audio editing

With this unit, only fade-in and fade-out can be performed.

Note

When edited audio is played with this unit, fade-out/fade-
in processing is carried out in normal-speed playback only. 
To play the same edited audio with the SRW-5000/5500, 
upgrading of internal software may be required.

Display of duration between edit points

The duration between any two of IN, OUT, AUDIO IN, or 
AUDIO OUT points can be displayed by simultaneously 
pressing two buttons corresponding to those edit points.

Digital time counter

The time counter display shows CTL and time codes 
(LTC/VITC

3)

), or user bits data for precise setting of edit 

points.

3)

LTC (Longitudinal Time Code):

Time code recorded on a longitudinal track

VITC (Vertical Interval Time Code):

Time code recorded on a video track during the vertical blanking interval

1-2 Optional Accessories

The following accessories can be used with this unit.

HKSR-5001 Format Converter Board 

This allows format conversion described below:
• 2-3 pulldown (23.98PsF to 59.94i, 24PsF to 60i)
• Conversion between 1080 and 720P
• 4:2:2 between 4:4:4

(Conversion of 4:4:4 to 4:2:2 is possible only when the 
HKSR-5803SQ or HKSR-5803HQ is additionally 
installed.)

Note

When the serial number of this unit is 12001 or higher, the 
format conversion above is available when the HKSR-
5001 is installed. The HKSR-5803SQ or HKSR-5803HQ 
is not required for the format conversion above.

For details on format conversion, see “Recording and 
playback tape formats and conversion output” on 
page 199.

HKSR-5802 Digital Betacam/HDCAM Processor 
Board

This allows you to play back Digital Betacam or HDCAM 
tapes and output SD and HD signals.
When the system is operated in 4:4:4 mode, up conversion 
of the output to HD signals are possible as follows, 
depending on the system setting.

1080:

 Up conversion to 1080.

720:

 Up conversion to 720P.

When the system is operated in 4:4:4 mode, no up-
converted HD output can be obtained.

HKSR-5803SQ RGB SQ Processor Board

This allows you to accept dual link HD SDI input, and 
record and play back in RGB (4:4:4) SQ mode.

Note

When the serial number of this unit is 12001 or higher, 
recording and playing back in RGB (4:4:4) SQ mode do 
not require the HKSR-5803SQ.

HKSR-5803HQ Advanced HQ Processor Board

This allows double-speed playback for the applicable 
system settings 

(see page 11)

. Also, recording and 

playback for the for the 4:2:2/1080/50P, 59P, or 60P signal 
and the dual-stream (3D) signal are supported. Normal-
speed recording and playback in RGB (4:4:4) HQ mode as 
well as RGB (4:4:4) SQ mode are also supported.

Note

When the serial number of this unit is 12001 or higher, 
recording and playback at normal speed in RGB (4:4:4) 

Содержание HKSR-5803HQ




















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HKSR-5803HQ

Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Бренд: Baracoda Страницы: 42
Paradyne 3163 Quick Reference preview
3163
Бренд: Paradyne Страницы: 16
M86 Security R3000 Series Evaluation Manual preview
R3000 Series
Бренд: M86 Security Страницы: 46
IBM 8677 - BladeCenter Rack-mountable - Power... Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power...
Бренд: IBM Страницы: 126
BSS Audio EC-4B Installation Manual preview
EC-4B
Бренд: BSS Audio Страницы: 20
Reeven NAIA Installation Manual preview
NAIA
Бренд: Reeven Страницы: 2
Fostex DE-1 Service Manual preview
DE-1
Бренд: Fostex Страницы: 20
ESD ECS-CPCIs/FPGA Hardware Manual preview
ECS-CPCIs/FPGA
Бренд: ESD Страницы: 28
Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual preview
HIRESCHMANN IT MAMMUTHUS MTM8003-FAN
Бренд: Belden Страницы: 84
OWC Mercury FireWire 400 Owner'S Manual preview
Mercury FireWire 400
Бренд: OWC Страницы: 2
Aleratec 260206 Quick Start Manual preview
260206
Бренд: Aleratec Страницы: 16
Idis DR-8516 Installation Manual preview
DR-8516
Бренд: Idis Страницы: 28
SilverStone SDP12 Quick Start Manual preview
SDP12
Бренд: SilverStone Страницы: 2
Analog Devices EZ-KIT LITE ADSP-2191 Manual preview
EZ-KIT LITE ADSP-2191
Бренд: Analog Devices Страницы: 98
Advantech EPC-R6410 User Manual preview
EPC-R6410
Бренд: Advantech Страницы: 70
Juniper MX104 Quick Start Manual preview
MX104
Бренд: Juniper Страницы: 30
Aaeon FWS-7811 Manual preview
FWS-7811
Бренд: Aaeon Страницы: 100
IBASE Technology SI-22-415 User Manual preview
SI-22-415
Бренд: IBASE Technology Страницы: 49

Бренды по названию

Популярные бренды

Загрузить еще бренды