manualshive.com logo in svg

Sony HKSR-5803HQ, Руководство по эксплуатации

"Sony HKSR-5803HQ" - это высококачественный аудиоусилитель для улучшения звука. Для правильной установки и использования, скачайте бесплатно Инструкция по установке с manualshive.com. Получите доступ к руководству пользователя для бесперебойного использования этого устройства.

Поделиться
Скачать
background image

11

1-1 Features

  Chapt

er 1  Ov

e

rv

ie

w

Applicable system settings:

4:2:2 signal

1920

×

1080:

 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/

59.94i/60i

1280

×

720:

 50P/59.94P

4:4:4 (RGB 10 bits) signal

1920

×

1080:

 23.98PsF/24PsF/25PsF/29.97PsF/30PsF, 50i/

59.954i/60i (SQ mode)

• When the serial number of this unit is lower than 12001

Double-speed playback requires the HKSR-5803HQ 
(option).

• When the serial number of this unit is 12001 or higher

Double-speed playback is standard and does not require 
the HKSR-5803HQ (option).

• The DIGITAL I/O (AES/EBU) INPUT/OUTPUT 

connectors cannot be used for double-speed playback/
recording.

• Only a limited number of devices can support signals 

processed for double-speed playback.

For details, refer to the operation manual supplied with 
the device to be used for double-speed playback.

Internal format conversion function

By installing an optional HKSR-5001, when the operation 
mode of this unit is 23.98PsF or 24PsF, a 59.94i or 60i 
mode HD SDI output (audio/VITC multiplex) is made 
available. Additionally, conversion in either direction 
between 1920

×

1080 and 1280

×

720, and conversion from 

4:2:2 signal to 4:4:4 signal is possible, and with the 
additional installation of an HKSR-5803SQ or HKSR-
5803HQ, conversion from a 4:4:4 signal to a 4:2:2 signal 
is also possible.

Noiseless playback with non-tracking head (for 
HDCAM-SR format only)

In addition to a playback head, a non-tracking head is 
provided. Noiseless playback within the range of –0.5 to 
+1.0 times normal playback speed is thus possible.

Noiseless playback with DT heads (for Digital 
Betacam or HDCAM format only)

When using the HDCAM format, the dedicated playback 
DT heads allow you to perform noiseless playback in the 
range from –1 to +2 times normal speed, including still-
picture playback. When using the Digital Betacam format, 
the playback range is from –1 to +3. 

Note

Digital Betacam playback and HDCAM playback require 
the HKSR-5802 (option).

Video and audio confidence heads

Video and audio (channels 1 through 12) signals can be 
recorded and simultaneously played back to check the 
recording.

Internal time code generator and reader

The internal time code generator allows you to record time 
code (LTC or user bits) together with video and audio 
signals. Time codes (LTC or user bits) can be read during 
playback using the time code reader.

Computer servo system

Computer-controlled servo motors provide direct drive for 
the drum, capstan, and two reels, enabling quick and 
accurate tape access.

Capstan override function

You can adjust the playback speed by ±15% to ensure 
synchronization between, for example, two VTRs playing 
back the same program.

Note

Noiseless playback cannot be performed for HDCAM-SR 
format when playback speed e1 times normal 
speed.

Independent audio level control

It is possible to adjust the recording and playback levels 
either independently on each channel or simultaneously on 
all 12 channels for HDCAM-SR format while monitoring 
the peak values. For Digital Betacam or HDCAM format, 
adjusting the playback level is possible either 
independently on each channel or simultaneously on all 
channels (4 channels and the cue track audio).

Tele-File

2)

 memory label system

This unit incorporates the Tele-File memory label system 
to allow users to read, write and update videocassette 
management information, log data (IN/OUT points) and 
cue point data on memory labels, providing greater 
efficiency in cassette management and editing.

2)

Tele-File

A contact-free system for writing, reading, and modifying video cassette-
related information on IC memory-bearing labels. Tele-File is a trademark 
of Sony Corporation.

Features for ease of operation

Remote control operation

The VTR has a serial RS-422A 9-pin connector to allow 
control of the VTR by an external control unit.
The VTR also comes with 9-pin REMOTE 1-IN(9P) and 
REMOTE 1-I/O(9P) connectors to support bridge 
connection of multiple SRW-5800 units or other VTRs 
equipped with 9-pin remote connectors for simultaneous 
operation. Furthermore, you can control the VTR from an 
external control unit with a parallel (50-pin) interface. 

Notes

Содержание HKSR-5803HQ




















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HKSR-5803HQ

Rane CP 31 Datasheet preview
CP 31
Бренд: Rane Страницы: 4
Tripp Lite N48M Series Installation Manual preview
N48M Series
Бренд: Tripp Lite Страницы: 20
Alacritech 1000x1 Hardware Installation Manual preview
1000x1
Бренд: Alacritech Страницы: 20
ZyXEL Communications ZyXEL ZyAIR B-120 Quick Installation Manual preview
ZyXEL ZyAIR B-120
Бренд: ZyXEL Communications Страницы: 20
QuickLink QL-CXS Installation Manual preview
QL-CXS
Бренд: QuickLink Страницы: 8
RANA Systems Elite Controller User Manual preview
Elite Controller
Бренд: RANA Systems Страницы: 328
Aaeon SBC-555 Manual preview
SBC-555
Бренд: Aaeon Страницы: 72
Lindy 32116 User Manual preview
32116
Бренд: Lindy Страницы: 12
IceTech POD-51EH-C541U-12 Operating Instructions Manual preview
POD-51EH-C541U-12
Бренд: IceTech Страницы: 8
Intel IXP28 Series Manual preview
IXP28 Series
Бренд: Intel Страницы: 154
AXIOMTEK FAB118-14B5P7 Quick Installation Manual preview
FAB118-14B5P7
Бренд: AXIOMTEK Страницы: 2
Uctronics U6180 Instruction Manual preview
U6180
Бренд: Uctronics Страницы: 2
QSC Q-SYS QIO-GP8x8 Hardware User Manual preview
Q-SYS QIO-GP8x8
Бренд: QSC Страницы: 13
Cooler Master MCY-C3P1-KWNN Manual preview
MCY-C3P1-KWNN
Бренд: Cooler Master Страницы: 4
NuDAQ ACL-8112 Series User Manual preview
ACL-8112 Series
Бренд: NuDAQ Страницы: 92
ANTAIRA MSC-208A2 Installation Manual preview
MSC-208A2
Бренд: ANTAIRA Страницы: 6
IEI Technology PUZZLE-IN005 User Manual preview
PUZZLE-IN005
Бренд: IEI Technology Страницы: 106
ICP DAS USA ET-7017-10 Quick Start Manual preview
ET-7017-10
Бренд: ICP DAS USA Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды