manualshive.com logo in svg

Sony HKSR-5803HQ, Руководство по эксплуатации

"Sony HKSR-5803HQ" - это высококачественный аудиоусилитель для улучшения звука. Для правильной установки и использования, скачайте бесплатно Инструкция по установке с manualshive.com. Получите доступ к руководству пользователя для бесперебойного использования этого устройства.

Поделиться
Скачать
background image

3

WARNING: THIS WARNING IS APPLICABLE 

FOR OTHER COUNTRIES.

1. Use the approved Power Cord (3-core mains lead) / 

Appliance Connector / Plug with earthing-contacts that 
conforms to the safety regulations of each country if 
applicable.

2. Use the Power Cord (3-core mains lead) / Appliance 

Connector / Plug conforming to the proper ratings 
(Voltage, Ampere).

If you have questions on the use of the above Power Cord 
/ Appliance Connector / Plug, please consult a qualified 
service personnel.

CAUTION

The apparatus shall not be exposed to dripping or 
splashing.  No objects filled with liquids, such as vases, 
shall be placed on the apparatus.

CAUTION

The unit is not disconnected from the AC power source 
(mains) as long as it is connected to the wall outlet, even if 
the unit itself has been turned off.

For the customers in the U.S.A. (for SRW-5800)

This equipment has been tested and found to comply with 
the limits for a Class A digital device, pursuant to Part 15 
of the FCC Rules.  These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications.  Operation 
of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be 
required to correct the interference at his own expense.

You are cautioned that any changes or modifications not 
expressly approved in this manual could void your 
authority to operate this equipment.

All interface cables used to connect peripherals must be 
shielded in order to comply with the limits for a digital 
device pursuant to Subpart B of Part 15 of FCC Rules.

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) 
this device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.

For the customers in Canada

This Class A digital apparatus complies with Canadian 
ICES-003.

For the customers in Europe

This product with the CE marking complies with the EMC 
Directive issued by the Commission of the European 
Community.
Compliance with this directive implies conformity to the 
following European standards:

• EN55103-1: Electromagnetic Interference(Emission)
• EN55103-2  : Electromagnetic Susceptibility(Immunity)
This product is intended for use in the following 
Electromagnetic Environment: E4 (controlled EMC 
environment, ex. TV studio)

For the customers in Europe

The manufacturer of this product is Sony Corporation, 1-
7-1 Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product 
safety is Sony Deutschland GmbH, Hedelfinger Strasse 
61, 70327 Stuttgart, Germany.

This apparatus shall not be used in the residential area.

For kundene i Norge

Dette utstyret kan kobles til et IT-strømfordelingssystem.

Apparatet må tilkoples jordet stikkontakt

Suomessa asuville asiakkaille

Laite on liitettävä suojamaadoituskoskettimilla 
varustettuun pistorasiaan

För kunderna i Sverige

Apparaten skall anslutas till jordat uttag

For the customers in Europe, Australia and New 
Zealand

WARNING

This is a Class A product.  In a domestic environment, this 
product may cause radio interference in which case the 
user may be required to take adequate measures.

WARNING

Excessive sound pressure from earphones and headphones 
can cause hearing loss.
In order to use this product safely, avoid prolonged 
listening at excessive sound pressure levels.

For the customers in Taiwan only

Содержание HKSR-5803HQ




















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HKSR-5803HQ

Industrex M43ic Instruction Manual preview
M43ic
Бренд: Industrex Страницы: 51
ekwb EK-Vector Radeon RX5700 + XT Backplate Installation Manual preview
EK-Vector Radeon RX5700 + XT Backplate
Бренд: ekwb Страницы: 7
Analog Devices Linear SCP-LT8362-S-EVALZ Demo Manual preview
Linear SCP-LT8362-S-EVALZ
Бренд: Analog Devices Страницы: 8
WHOOP WHT-25LT Quick Start Manual preview
WHT-25LT
Бренд: WHOOP Страницы: 26
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Бренд: Riverbed Страницы: 38
Acces I/O products MPCIE-ICM232-2 Hardware Manual preview
MPCIE-ICM232-2
Бренд: Acces I/O products Страницы: 5
Enertronica Santerno SINUS H PROFInet User Manual preview
SINUS H PROFInet
Бренд: Enertronica Santerno Страницы: 34
Buffalo LinkStation Quick Setup Manual preview
LinkStation
Бренд: Buffalo Страницы: 2
Datasat DDR-16 AES67 Installation And Operating Manual preview
DDR-16 AES67
Бренд: Datasat Страницы: 24
QNAP TS-1283XU-RP User Manual preview
TS-1283XU-RP
Бренд: QNAP Страницы: 54
Tait TM9000 Installation Instructions Manual preview
TM9000
Бренд: Tait Страницы: 8
C4i GEN-1 Quick Operation Manual preview
GEN-1
Бренд: C4i Страницы: 5
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Бренд: Paradyne Страницы: 10
Kramer RK-10MT Quick Start Manual preview
RK-10MT
Бренд: Kramer Страницы: 2
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Бренд: Dahua Страницы: 452
WTI NPS-16HD20-1 User Manual preview
NPS-16HD20-1
Бренд: WTI Страницы: 178
ADTRAN ENHANCED PSD 239 H2R Product Manual preview
ENHANCED PSD 239 H2R
Бренд: ADTRAN Страницы: 2
NXP Semiconductors i.MX 8M Mini LPDDR4 EVK User Manual preview
i.MX 8M Mini LPDDR4 EVK
Бренд: NXP Semiconductors Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды