manualshive.com logo in svg

Sony HKSR-5803HQ, Руководство по эксплуатации

"Sony HKSR-5803HQ" - это высококачественный аудиоусилитель для улучшения звука. Для правильной установки и использования, скачайте бесплатно Инструкция по установке с manualshive.com. Получите доступ к руководству пользователя для бесперебойного использования этого устройства.

Поделиться
Скачать
background image

22

2-1 Control Panel

  Chap

te

r 2 

 Lo
c

a

ti

ons

 a

nd F

unc

tion
s

 of
 P

a

rt

s

The ACTIVE LINE setting displayed on page 2 can be 
made in the SYSTEM menu under the OTHERS CHECK 
menu in the MAINTENANCE menu. The phase settings 
displayed on pages 3 to 5 and the settings relating to 
META DATA recording displayed on page 6 can be made 
in the PHASE SET/META DATA menu under the 
ALT+OTHERS CHECK menu in the MAINTENANCE 
menu.

For details, refer to the Installation Manual.

b

REF SYNC (reference signal) indicators

These indicate the signal selected as the reference signal. 
If there is no reference signal input to the selected 
connector, the STOP button flashes.

EXT SD:

 Lights when “extern SD” is selected by the VTR 

SETUP menu item 006 “EXTERNAL REFERENCE 
select”.

EXT HD:

 Lights when “extern HD” is selected by the 

VTR SETUP menu item 006 “EXTERNAL 
REFERENCE select”.

INPUT VIDEO:

 Lights when “INPUT” is selected by the 

VTR SETUP menu item 005 “SERVO/AV 
REFERENCE select”.

c

SERVO indicator

Lights up when the drum servo and capstan servo are 
locked.

d

REC INHIBIT indicator

Only when this indicator is not lit, you can make settings 
for assemble/insert editing mode, and carry out recording 
and playback operations.
The status of this indicator depends on the setting of the 

[F2]

 (REC INH) button in the HOME menu and the state 

of the record-protect plug on the cassette.

a) Toggling between lit/flashing settings is possible using the VTR SETUP 

menu item 104 “REC INHIBIT LAMP FLASHING”.

5

 Search control section

a

SHUTTLE button

Press to enter shuttle mode. In this mode, the button lights 
and playback at the speed corresponding to the angle of 
rotation of the search dial is possible. The playback speed 
range depends on the frame frequency of the unit. In this 
mode, the search dial clicks at the positions for 0 (still 
picture) and ±10 times normal playback speed (HDCAM/
Digital Betacam) or ±8 times normal playback speed 
(HDCAM-SR).

b

JOG button

Press to select jog mode. In this mode, the button lights up 
and playback is possible at –1 to +1 times normal speed, ±2 
times normal speed (HDCAM/HDCAM-SR), or ±3 times 
normal speed (Digital Betacam) (determined by the setting 
in the VTR SETUP menu item 107 “JOG DIAL 
RESPONSE”). In this mode, the search dial does not click.

c

VAR (variable) button

Press to select variable speed playback mode for noiseless 
playback in the range from –0.5 to +1 times normal speed 
(HDCAM-SR), from –1 to +2 times normal speed 
(HDCAM), or from –1 to +3 times normal speed (Digital 
Betacam). Playback exceeding this speed range is not 
possible. The search dial clicks at the positions for still-
picture and normal playback speed.

Note

Setting of the 

[F2]

 

(REC INH) button in 
the HOME menu

State of the record-
protect plug on the 
cassette

REC INHIBIT 
indicator

all

Recording disabled

Lit/flashing

a)

Recording allowed

Lit

crash REC, video/
CTL, audio/CTL

Recording disabled

Lit/flashing

a)

Recording allowed

Unlit

off

Recording disabled

Lit/flashing

a)

Recording allowed

Unlit

a)

Frame frequency

Playback speed range (for 
HDCAM-SR format)

23.98/24 Hz

±50 times normal playback speed

25 Hz

±48 times normal playback speed

29.97/30 Hz

±40 times normal playback speed

50 Hz

±24 times normal playback speed

59.94/60 Hz

±20 times normal playback speed

R

E

V

ER

SE

FORW

AR

D

SH

UT

TL

E

JOG

VAR

1

 SHUTTLE button

2

 JOG button

3

 VAR button

4

 Search dial

Содержание HKSR-5803HQ




















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HKSR-5803HQ

D-Link ShareCenter DNS-320L Datasheet preview
ShareCenter DNS-320L
Бренд: D-Link Страницы: 4
National Instruments NI 9213 Getting Started preview
NI 9213
Бренд: National Instruments Страницы: 11
Teagle Tomahawk 7100 Operator'S Manual preview
Tomahawk 7100
Бренд: Teagle Страницы: 40
Supero AOC-SIMLC User Manual preview
AOC-SIMLC
Бренд: Supero Страницы: 68
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Бренд: MiLAN Страницы: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Бренд: Symantec Страницы: 2
Telex Communications 2472AA Instruction Manual preview
2472AA
Бренд: Telex Communications Страницы: 28
IBM 8677 - BladeCenter Rack-mountable - Power Supply Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power Supply
Бренд: IBM Страницы: 126
Lanner NCA-1040 User Manual preview
NCA-1040
Бренд: Lanner Страницы: 59
AC&NC JetStor NAS 724UX User Manual preview
JetStor NAS 724UX
Бренд: AC&NC Страницы: 117
ZyXEL Communications ZyAIR B-100 Quick Installation Manual preview
ZyAIR B-100
Бренд: ZyXEL Communications Страницы: 23
ZyXEL Communications POE-12 Specifications preview
POE-12
Бренд: ZyXEL Communications Страницы: 2
Vivint AirBridge VS-YOFIMN-000 Quick Reference preview
AirBridge VS-YOFIMN-000
Бренд: Vivint Страницы: 2
UMAX Technologies SuperMac E100 User Manual preview
SuperMac E100
Бренд: UMAX Technologies Страницы: 27
Cypress Semiconductor CY7C1381DV25 Specification Sheet preview
CY7C1381DV25
Бренд: Cypress Semiconductor Страницы: 28
Thermalright Macho Rev. A (BW) Manual preview
Macho Rev. A (BW)
Бренд: Thermalright Страницы: 32
TERSUS Precis-BX305 Quick Start Manual preview
Precis-BX305
Бренд: TERSUS Страницы: 7
Hameg HM6050-2K Manual preview
HM6050-2K
Бренд: Hameg Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды