Sony BKFV-100/1, Руководство по обслуживанию

Страница: 79 / 258

2-11
FVS-1000 MMP1
2-3. Location of Main Parts
No. Sensor Function
1
Front internal lock SW The power is turned on by closing the front door.
2
S side tension regulator potential meter This meter detects the rotation angle of the S side tension regulator arm.
3
S tension regulator position sensor This sensor detects load and unload position of S tension regulator.
4
S side reel A/B winding SW This switches A/B winding at the S side reel.
5
Lens emergency This detects the lens position. (Photo-diode)
6
Gate (retainer) discrimination SW This switch discriminates between 16 mm and 35 mm of the gate.
7
S side PAD roller position sensor This sensor detects load and unload position of the S side PAD roller.
8
S side PT roller position sensor This sensor detects load and unload position of the S side PT roller.
9
A side PAD TYPE SW This switch discriminates between 16 mm and 35 mm of the S side PAD roller and
detects whether the S side PAD roller is installed or not.
!/
Electrostatic sensor This sensor detects the film (perforations) position.
!-
Gate TYPE SW This switch discriminates between 16 mm and 35 mm of the gate and detects whether
the gate is installed or not.
!=
Slide adaptor detection SW This switch detects the slide adaptor.
![
Mirror
!]
Gate position sensor This sensor detects the load and unload position of the gate (retainer).
!\
T side tension regulator potential meter This meter detects the rotation angle of the T side tension regulator arm.
!;
T side tension regulator position sensor This sensor detects the load and unload position of the T side tension regulator.
!'
T side reel A/B winding SW This switches A/B winding at the T side reel.
!,
Lens emergency (LED) This detects the lens position.
!.
OPS H direction glass sensor This sensor detects the glass position in the horizontal direction of the OPS.
@/
OPS V direction glass sensor This sensor detects the glass position in the vertical direction of the OPS.
@-
T side PAD roller position sensor This sensor detects load and unload position of the T side PAD roller.
@=
T side PT roller position sensor This sensor detects load and unload position of the T side PT roller.
@[
T side PAD TYPE SW This switch discriminates between 16 mm and 35 mm of the T side PAD roller and
detects whether the S side PAD roller is installed or not.
@]
Integral ball discrimination sensor This sensor discriminates among 16 mm, 35 mm and 8P of the integral ball.
@\
Lamp SW Emergency switch to turn off the lamp
@;
STANDBY SW Switch for STANDBY
@'
SV RESET SW Switch for servo reset
@,
Breaker Switch to turn on or off the system
@.
Rear internal lock SW When replacing the lens, the power is turned off by opening the rear door.
#/
Lens load SW When replacing the lens, the lens can be moved.
#-
Imager movement table position sensor This sensor detects whether the imager movement table is pulled out or not.
#=
Loop sensor For detecting the loop amount between the sprockets.
Rear side
#/
@.
#-