Sokkia SRX1 Скачать руководство пользователя страница 75

Страница: 75 / 184

14. DISTANCE MEASUREMENT

PROCEDURE

1. Accurately sight the target manually.



"11.3 Manually Sighting the Target"

2. Press

{SETTINGS}

to switch to SETTINGS mode

and select the Aiming tab or press

[AIM]

in Meas

mode.



Allocating

[AIM]

: "21.6 Allocating Key

Functions"

When

[AIM]

is pressed, a gauge indicating light

intensity is displayed.

• The more

displayed, the greater the

quantity of reflected light.

•

If “



” is displayed, only enough light for the

measurement is returned.

•

When “



” is not displayed, accurately resight

the target.

[BEEP]/[OFF]

: Sets a buzzer sound when

measurement is possible. Press to switch on
and off.

[DIST]

: Returns to Meas mode and starts

distance measurement. This softkey is not
displayed when the returned signal checking
function is accessed from Program mode (SDR).

3. Press

[OFF]

to finish signal checking.

Press

{ESC}

or tap the cross in the top-right

corner to return to the previous screen.



• When

is displayed persistently, contact your Sokkia agent.

• If no key operations are performed for two minutes, the display automatically returns to the previous

screen.

Содержание SRX1

























































































































































































Результаты поиска

Содержание SRX1

Отзывы:

Sokkia SRX1, Руководство оператора, Страница: 75 / 184

Результаты поиска

Содержание SRX1

Отзывы: