Sokkia SRX1 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 184

Sokkia SRX1 Скачать руководство пользователя страница 40

32

6. USING THE CF CARD SLOT

CF (Compact Flash) cards, for saving surveying and other data, are supported by the SRX. However,
users with SD cards will need to use an CF card slot adapter.
Management of JOB and survey data is done in Program mode (SDR).



Series SRX SDR Software Reference Manual



• Contact your Sokkia agent for details regarding communication formats for CF card input/output.
• Data can also be transferred to an external device for storage and/or editing using the SRX’s USB

ports.



"8. CONNECTING TO EXTERNAL DEVICES"



• Do not remove the CF card during data read/write.
• Make sure the eject button is fully depressed when a CF card is inserted. A protruding eject button

will be depressed when the card cover is closed causing the card to be ejected.

• Always close the card cover before moving the instrument. The card cover can be damaged if

forced open beyond a certain angle.

PROCEDURE Inserting the CF card

1. Push the catch on the card cover to open.

2. Insert the CF card until a click is heard.

3. Close the card cover.

6.1

Inserting/Removing the CF Card

Catch

Card cover

Card

slot

Eject button

«
...
38
39
40
41
42
...
»

Содержание SRX1

























































































































































































Отзывы:

Нет отзывов