Sokkia SRX1 Скачать руководство пользователя страница 129

Страница: 129 / 184

121

21. CHANGING THE SETTINGS



• The EDM ALC setting will automatically be switched to "Free" when the distance measurement

mode is set to "Tracking" (target is moved during distance measurement).

• EDM tab

Items set, options, and input range (*: Factory setting)

Dist. mode (Distance measurement mode): Fine “R”*, Fine AVG n= 2 (Setting: 2 to 9 times), Fine

“S”, Rapid “S”, Rapid "R", Tracking

Reflector: Prism*/360°

Prism/Sheet/Reflectorless

Prism constant:

-99 to 99 mm ("Prism" is selected: -30*, "360° Prism" is

selected: -7, "Sheet" is selected: 0)

Aperture:

1 to 999mm ("Prism" is selected: -58*, "360° Prism" is

selected: 34, "Sheet" is selected: 20)

Illum. hold (

{



}

function):

Guide light*/Laser-pointer

Guide light (Bright):

1 to 3 (3*)

• The setting for "Fine AVG" distance measurement mode can be increased/decreased using the

[ + ]

[ - ]

softkeys.

• Target information can be edited and recorded.



"PROCEDURE Recording and editing target information"

• "Prism constant" and "Aperture" will not be displayed when Reflectorless" is selected in

"Reflector".

• The Guide light brightness item ("Guide light (Bright)") will be displayed only when "Illum. hold"

is set to "Guide light".



Prism constant correction

Reflective prisms each have their prism constant.
Set the prism constant correction value of the reflective prism you are using. When selecting
"Reflectorless" in "Reflector", prism constant correction value is set to "0" automatically.

21.3

EDM Settings

Содержание SRX1

























































































































































































Результаты поиска

Содержание SRX1

Отзывы:

Sokkia SRX1, Руководство оператора, Страница: 129 / 184

Результаты поиска

Содержание SRX1

Отзывы: