Sokkia SRX1, Руководство оператора, Страница: 65 / 184

57
12. MEASUREMENT WITH AUTO TRACKING

Configuration tab:"11.1 Auto Pointing Settings"
2. Set the area in which to perform target sighting in
the Search area tab. Drag the box to specify the
desired or area or input vertical and horizontal
angle values.
Angle values can only be specified in 1°30’ steps
(e.g. 15°00’, 16°30’, 18°00’ etc.). Input values not
conforming to this format will be automatically
rounded up.
3. Press [OK] .
PROCEDURE
1. Use the peep sight to aim the objective lens in the
general direction of the target. (The vertical and
horizontal jogging knobs can be used for precise
adjustments of the instrument and telescope.)
2. Select [DIST] , [RC Cont] , or [SRCH] in any Meas
mode screen. The telescope and top half of the
instrument rotate and target auto-search begins.
When the target is found, the instrument sights
the center of the prism and Auto Tracking starts.

Allocating softkeys: "21.6 Allocating Key
Functions"
3. Press [AT Off] in a Meas mode screen to stop
Auto Tracking.

• When [STOP] is pressed, distance measurement
will stop but Auto Tracking will remain active.
12.2 Measurement with Auto Tracking