Sokkia SRX1 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 184

Sokkia SRX1 Скачать руководство пользователя страница 22

4. PRODUCT OUTLINE

14

Bluetooth antenna

When performing communication using Bluetooth wireless technology, the antenna must be directed
towards the intended companion device.



Handle the antenna with care and be aware of the following points when operating.
• An extended antenna may be damaged if struck during operation.
• The antenna may be damaged if forcibly bent in an incorrect direction. The antenna cannot be bent

to angles exceeding 90°.

Beam detector for On-demand Remote Control System

Always open the beam detector cover when using the On-demand Remote Control system.



• The beam detector cover can be damaged if forced open beyond a certain angle. Always close the

beam detector cover before moving the instrument.

• Never touch the beam detector. The ability of the system to perform Turning may be adversely

affected.

Beam

detector

«
...
20
21
22
23
24
...
»

Содержание SRX1

























































































































































































Отзывы:

Нет отзывов