Sokkia SRX1 Скачать руководство пользователя страница 48

Страница: 48 / 184

8. CONNECTING TO EXTERNAL DEVICES

Press

[Inquire]

to inquire about Bluetooth devices

in the immediate vicinity of the SRX and display
their device name and address in a list. Select a
device from this list and press

[OK]

to add to the

Link device list in step 3.

Press

[Delete]

to delete the selected device

name. Deleted device names cannot be retrieved.

• Select a device and press

[Edit]

in the second

page

to update the device name and/or device

address.

5. Press

[OK]

to complete registration and return to

the screen in step 2.

PROCEDURE Displaying Bluetooth information for the SRX

1. Select "Comms" in SETTINGS mode.

2. Press

[Info]

in the Bluetooth tab to display the

device name and Bluetooth address for the SRX
Bluetooth module. Register the Bluetooth address
displayed here in the paired device.



• Bluetooth communication causes SRX battery power to be depleted at a higher than average rate.

Under the "Slave" setting, the SRX is constantly being searched for by communicable devices and
therefore consumes an ever greater amount of power.

• Check that the companion device (data collector, computer, cellular phone, or On-demand Remote

Control system etc.) is turned on and the relevant Bluetooth settings are complete.

• All communication settings will be changed to factory settings when a cold boot is performed.

Comms setup will need to be performed again.



"8.1 Wireless Communication using Bluetooth Technology"

8.2

Communication between the SRX and Companion Device

Содержание SRX1

























































































































































































Результаты поиска

Содержание SRX1

Отзывы:

Sokkia SRX1, Руководство оператора, Страница: 48 / 184

Результаты поиска

Содержание SRX1

Отзывы: