Sokkia SRX1 Скачать руководство пользователя страница 72

Страница: 72 / 184

13. ANGLE MEASUREMENT

The SRX automatically turns from the reference direction to the specified angle (target).

• SRX also turns to the target coordinates when reference angle is omitted.



• Rotation may not be completed correctly when specifiying an angle near the zenith or nadir if "Tilt

crn." or "Coll. crn" is set to "Yes" in "Obs.condition".

PROCEDURE

1. Sight the point you will use as the reference angle

and set it as the reference angle.
Sight the reference point and press

[0SET]

, or

input the reference point angle.



"13.1 Measuring the Horizontal Angle

between Two Points (Horizontal Angle 0°)"/
"13.2 Setting the Horizontal Angle to a
Required Value (Horizontal Angle Hold)"

2. Press

{SETTINGS}

to switch to SETTINGS

mode.

13.3

Turning the Instrument from the Reference Angle to a
Specified Angle

Содержание SRX1

























































































































































































Результаты поиска

Содержание SRX1

Отзывы:

Sokkia SRX1, Руководство оператора, Страница: 72 / 184

Результаты поиска

Содержание SRX1

Отзывы: