Sokkia SRX1 Скачать руководство пользователя страница 52

Страница: 52 / 184

9. SETTING UP THE INSTRUMENT



• Mount the battery in the instrument before performing this operation because the instrument will tilt

slightly if the battery is mounted after levelling.

PROCEDURE

1. Set up the tripod

Make sure the legs are spaced at equal intervals
and the head is approximately level.
Set the tripod so that the head is positioned over
the surveying point.
Make sure the tripod shoes are firmly fixed in the
ground.

2. Place the instrument on the tripod head.

Supporting it with one hand, tighten the centering
screw on the bottom of the unit to make sure it is
secured to the tripod.

3. Looking through the optical plummet eyepiece,

turn the optical plummet eyepiece to focus on
the reticle.
Turn the optical plummet focusing ring to focus
on the surveying point.

9.1

Centering

Centering screw

Focussing on the survey point

Focussing on

the reticle

Содержание SRX1

























































































































































































Результаты поиска

Содержание SRX1

Отзывы:

Sokkia SRX1, Руководство оператора, Страница: 52 / 184

Результаты поиска

Содержание SRX1

Отзывы: