Vega 30 Router User Manual
Processing Control
Vega 30 Web Interface 6.8
Issue1 Revision 1
Page 93
© 2017 SAM
Item
Description
Destinations:
Columns show destination names only and are
not
editable.
Destination
Number
Destination’s physical router output number.
•
Rows 1 to 34: One row per video output.
•
Rows 35 to 58: Four rows per MADI output.
Video 8 Character
Name
The assigned 8 character destination name:
•
Rows 1 to 34: Video output name.
•
Rows 35 to 58: Name for 16-channels of each MADI output.
Lock Route 1-1
Check box.
Tick to connect the
video crosspoint
output port directly to the video input port with the
same port number, regardless of any routing in place on the video crosspoint.
This is done in a “1 to 1” manner.
For example, video crosspoint output port 14 to input port 14.
Lock Route 1-1
is a router configuration setting.
Lock Route 1-1
guarantees the presence of a video input’s embedded audio at a video
crosspoint output, useful for audio routing within the Vega 30 unit.
(Audio routing is done in the audio crosspoint.)
Note:
Lock Route 1-1
affects the video crosspoint. It does not prevent any
audio
routing
being made to the same
router
destination output.
See Section 3.5 “Routing Architecture” on page 20 for information about Vega 30 routing.
Quiet Switching V-Fade:
Enable
Check box.
Tick to enable audio quiet switching
on an output-by-output basis
.
Line Synchroniser Enable and Offset from Reference:
See Section 6 “Output Video Timing - Line Sync and Offset” on page 45 for information
on these controls. (Settings available with options VG10-CSx.)
See
Note 1
.
Enable
Check box.
Tick to enable the line synchronizer and clean switching functions.
Lines
Enter number of video lines of offset required with respect to video reference for the video
output. Setting must be in the range 0 to 15 inclusive.
Total offset = Lines Pixels offset.
Pixels
Enter number of pixels offset required with respect to video reference for the video
output. Setting must be in the range 0 to 4095 inclusive.
Table 25 Processing Control Web Page - Items in the ‘table section’