Vega 30 Router User Manual
Monitoring a Router Input and Output
Routing Use Cases 10.5
Issue1 Revision 1
Page 177
© 2017 SAM
Direct Video routing:
1.
In the RollCall Port Configuration template, enable ‘Lock Route’ for video output 2.
2.
Use RollCall Direct Audio routing XY panel to make the routing:
•
‘Destination 741 from channel source 23’.
•
‘Destination 742 from channel source 24’.
The stereo pair appears in the MADI output.
Pre-defined video sources and destinations:
1.
In the Port Configuration template, enable ‘Lock Route’ for video output 2.
2.
Create a user-defined source containing only the monitored stereo pair in audio
channels 5 and 6 and ‘null sources’ in other channels (for example, ‘
MySrc 52
’
below):
3.
Use either the RollCall ‘
Assoc Routing
’ XY panel or the Web ‘
Set Routes
’ page to
make the routing:
•
‘Destination 47 from Source 52’.
The stereo pair appears in the MADI output.
Router video output 2 is now a copy of router input 2, and may be used for video monitor-
ing. The stereo audio channels from the router input allow the user to listen to channels 1
and 2 of the input regardless of other video routing.
10.5.2 Monitor Audio in a Router Video Output
De-embed some audio channels from a video output and route these out on a MADI channel
for monitoring.
User-defined
Source
Video
Source
Audio Channel Sources
No.
Name
Vid.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
52
MySrc 52
-
-
-
-
-
23
24
-
-
-
-
-
-
-
-
-
-
Figure 129 Vega 30 Use Case - Monitoring Audio in a Video Output
(Switched) Video Output
De-muxed audio
Monitored audio channels
from the video output are
routed to channels in a
MADI output.
Audio Crosspoint
Video Crosspoint