Vega 30 Router User Manual
Embed a MADI Stereo Audio Pair into a Video Output
Getting Started 11.9
Issue1 Revision 1
Page 215
© 2017 SAM
11.9 Embed a MADI Stereo Audio Pair into a Video Output
Example: The requirement is to embed
audio channels 3 and 4 of MADI input 1 (audio channel sources “A.In 1A-3”,“A.In 1A-4”) into
audio channels 5 and 6 of Video input 1
when Video input 1 is routed to Video output 3
.
Procedure:
1.
Go to the Vega 30 Router
Home
Web page to check the VG10-AR audio routing
license (VG10-AR) is present.
In order to be able to route one or more specific audio channels in the Vega 30 Router, a
user-defined source (i.e. one of source numbers 47 to 500) needs to be defined.
To define a user-defined source for a MADI stereo pair:
2.
Click ‘Source Names’ in the navigation panel.
The
Source Names
Web page is shown, with the
Input Ports
table visible.
3.
Scroll down the page to view the
Source Names
table. Now define source 48, a
user-defined source, in row 48:
4.
Go down to row 48 in the table. See Figure 161.
5.
Enter the following values shown in Figure 161 in columns “Audio 5” and “Audio 6”
Note:
To carry out any audio routing within the Vega 30 Router, the VG10-AR license is required.
Figure 161 Source Names Table - Row 48
Audio channel source columns Audio 1, Audio 2, .. .. , Audio 16.