Vega 30 Router User Manual
Introduction
SNMP MIB Files for the Vega 30 Router D.1
Issue1 Revision 1
Page 257
© 2017 SAM
Appendix D SNMP MIB Files for the Vega 30 Router
D.1 Introduction
A mib file is used to manage devices in a network usually for the Simple Network
Management Protocol (SNMP). Mib files represents the device, in this case a Vega 30
Router, and describes it for SNMP.
SAM mib files can be downloaded from
https://s-a-m.com/support/protocols-and-mibs/
.
To use the full SNMP features of the Vega 30 Router, two mib files are required:
•
Probel-Common
•
Vega30Router
The files are listed below.
D.2 MIB Support
The Vega30Router.mib supports the following functionality, based on SNMP V2 format (see
the MIB file for details of values returned):
•
Traps:
•
Fan Status
•
PSU 1, PSU 2
•
Destination Protect
•
Destination Client Name
•
Destination Routed Source
•
Get (read only):
•
Application version, Application description, Application copyright, Application build date
•
FPGA Number (A, B, C & Z), FPGA Firmware Revision (A, B, C & Z)
•
Network MAC Address
•
Unit Serial Number
•
VG10-CSA, VG10-CSB, VG10-CSC, VG10-AR License status
•
Fan Status, Fan Speed
•
PSU1, PSU2 Status
•
Unit Temperature
•
Reference Standard
•
Input Information
•
Output Information
•
Line sync offset
•
Table of Sources
•
Get/Set (Read/Write):
•
Audio V-Fade rates for FPGA A, B & C
•
Input Standard
•
4K Input selection
•
Route Lock
•
Line Sync Enable/Disable, Line Sync Line offset, Line Sync Pixel offset
•
4K output selection
•
V-Fade Enable/Disable
•
Source 8-Character & Source 32-Character names