Vega 30 Router User Manual
User-defined Sources
Sources and Destinations 9.3
Issue1 Revision 1
Page 164
© 2017 SAM
9.3 User-defined Sources
User-defined sources are the sources numbered 47 to 500. After a User-defined source is
defined, it may be routed.
Each User-defined source can comprise:
•
A video source with up to 16 audio channels.
•
Up to 16 audio channels.
A User-defined source may be associated with physical router inputs or internal audio
sources. ‘Follow video’ audio channel sources can be used.
User-defined sources are defined via the Vega 30 Web interface or RollCall interface using
the following control interface pages:
•
Vega 30
Source Names
Web page.
•
Vega 30 Rollcall
Source Configuration
template.
Remember to click
Apply
at the top of the Web page when changes are finished.
9.3.1 Video Source Numbers
The video sources are numbered 1 to 34, corresponding to the external Video Input ports, see
Table 61 in Appendix B on page 247.
When using a 4K video source, the lowest video source number of the 4K quad-linked
sources is used.
9.3.2 Audio Channel Source Numbers
The audio channel sources are numbered 1 to 757:
•
1 to 544 correspond to fixed, de-embedded audio channels from the video crosspoint
outputs;
•
545 to 736 correspond and to the fixed, external MADI Input channels.
•
737 to 740 internal test signals.
•
741 internal audio silence.
•
742 to 757 ‘Follow Video’ internal sources.
See Table 63 in Appendix C on page 248 for more information.
Note:
Web Interface:
In the
Source Names
Web page, enter a name, or a blank (i.e. clear the table entry and
press
enter
). Press the
enter
key to finish.
Note:
RollCall interface:
In the RollCall
Source Configuration
template, enter either a number, or a name, or a
zero. Press the
enter
key to finish.