Vega 30 Router User Manual
Defining User-defined Sources
Vega 30 Web Interface 6.5
Issue1 Revision 1
Page 74
© 2017 SAM
6.5.4 Importing and Exporting Source and Destination Names
A whole set of source names and destination 8- and 32-character names can be exported or
imported from the
Source Names
web page or from the
Destinations
web page. The
Import
and
Export
controls on these web pages are shown in Figure 55 and Figure 56.
Both source names and destination 8- and 32-character names are contained in one file and
these names are imported or exported together. An exported file may be opened in a
spreadsheet editor or viewed in a text editor.
The file contents of an exported names spreadsheet file are shown in Appendix G “Source
and Destination Names File (Import and Export)” on page 276.
6.5.4.1
Recommended Procedure for Import/Export
•
Always export a names spreadsheet before importing another.
In this way, a record of all the earlier names may be kept.
•
When setting source names via a spreadsheet, use a “read-modify-write” approach:
1. Export a names spreadsheet file.
2. Modify it.
3. Import the modified spreadsheet.
•
In this way, any existing source names will be unchanged.
6.5.4.2
To Export
1.
Click
Export
to export a list of source and destination names to a spreadsheet file.
2.
At the ‘Opening Vega30names.csv’ dialog,
select to either:
•
Open the file to view the file and then save the file, under a new name if required.
•
or Save the file.
Note:
Import and Export do not work from the Vega 30 Web page in Internet Explorer
®
.
Figure 55 Source Names Web Page - Import and Export Controls
Figure 56 Destinations Web Page - Import and Export Controls
Note:
All names are over-written when importing:
The entire set of source and destination 8- and 32-character names is over-written when
importing a names spreadsheet file. Thus, every name must be uniquely defined in a
names spreadsheet file before importing.
Import
Export
Browse control
Import
Export
Browse control
