Vega 30 Router User Manual
Renaming Pre-defined Sources
Vega 30 Web Interface 6.4
Issue1 Revision 1
Page 63
© 2017 SAM
6.4 Renaming Pre-defined Sources
Pre-defined sources are defined in the
Source Names
table of the
Source Names
web page.
Sources 1 to 46:
(Table rows 1 to 46, pre-defined sources.)
These are pre-defined sources. Routing these sources means that the entire router input
source (video or 16 channels of a MADI input) is routed to a destination. These sources
are pre-defined for this purpose.
To define a user name for a pre-defined source:
1.
Enter a 32-character name and an 8 character name in the respective columns for the
source row.
2.
Click
Apply
at the top of the
Source Names
Web page
to apply changes.
This simply renames the pre-defined source with a user-defined name. Any video and audio
channels associated with this source are unaffected and cannot be modified.
Note:
Editing Source Names:
Source names can be edited either:
•
in the Vega 30 Web page,
•
or in the RollCall template screen,
•
or in the RollCall XY Panel.
•
or the
entire
set of source and destination names can be imported. (See Section
6.5.4 “Importing and Exporting Source and Destination Names” on page 74.)