Vega 30 Router User Manual
Monitoring a Router Input and Output
Routing Use Cases 10.5
Issue1 Revision 1
Page 176
© 2017 SAM
10.5 Monitoring a Router Input and Output
Router inputs can be monitored with the Vega 30 Router - including embedded audio.
Router outputs can be monitored with the Vega 30 Router - including embedded audio.
10.5.1 Monitor a Video Input
Produce a copy of the requisite Video Input at a router output and de-embed the audio to
make a copy of the audio in a MADI output.
Example:
Monitor video input 2 and an audio stereo pair (channels 7 and 8) embedded in it:
This requires:
•
Ensuring video input 2 signal is presented at a router output and all its embedded
audio signals are presented to the audio crosspoint.
•
De-embedding audio channels 7 and 8 of video
input
2 (audio channel sources 23
and 24).
•
Route de-embedded audio signals to audio channels 5 and 6 of MADI output 4 (audio
channel destinations 741 and 742, destination port 47) for monitoring.
(See Table 61 in Appendix B on page 247 for port numbering.
See Table 63 in Appendix C on page 250 for audio channel source/destination numbers.)
Figure 128 Vega 30 Use Case - Monitoring a Video Input - Copy Video and Copy Audio
Licenses required:
•
Video I/O options, as required.
•
Audio routing option, VG10-AR.
Routing:
•
‘Lock Route 1:1’ on the video crosspoint output
corresponding to the Video Input to be monitored. Use fixed
audio channel source numbers.
•
Association routing. Use:
•
Pre-defined video sources and destinations.
•
User-defined audio sources and partial sources.
(Switched)
Copy of Video Input’s
audio, for monitoring
De-muxed audio
(Use fixed audio channel source numbers)
Video Input
Copy of Video Input, for monitoring
Lock route using
‘
Lock Route 1:1
’
Video Crosspoint
Audio Crosspoint
