Vega 30 Router User Manual
Configuration
Vega 30 Web Interface 6.9
Issue1 Revision 1
Page 98
© 2017 SAM
Item
Description
(And see
Note 1
)
IP Address
Enter IP address of the Vega 30 unit.
See
Note 1
.
Subnet Mask
Enter subnet mask for the Vega 30 unit.
See
Note 1
.
Gateway
Enter IP address of the IP gateway for the Vega 30 unit. See
Note 1
.
DNS Server 1
Enter IP address of DNS server for the Vega 30 unit.
Note:
At least one DNS server must be specified if URLs are used in
any other settings.
See
Note 1
.
DNS Server 2
Enter IP address of a second DNS server for the Vega 30 unit.
Note:
At least one DNS server must be specified if URLs are used in
any other settings.
See
Note 1
.
Note 1:
Perform a unit restart to make any changes take effect.
Table 28
Configuration Web Page - System Network Items (
Restart Unit
after Changes Here)
Item
Description
Controller Name
Enter name of the Vega 30 unit.
PSU Fitted
Drop-down box.
Select external PSU arrangement.
Note:
When this setting matches the Vega 30 unit’s external PSU
arrangement, any front panel error display and any unit error
condition relating to an unfitted PSU module are cleared.
System Contact
Enter name or details of a system contact.
Location
Enter location of the Vega 30 unit.
NTP Server
Enter URL or IP Address of a NTP server.
The NTP server is used to synchronize logging messages to the
time of day.
See
Note 1
.
Note 1:
When a URL is used,
at least one DNS server IP address must be set up.
(This allows the URL to be resolved into an IP address.)
Table 29
Configuration Web Page - System Setting Items