Vega 30 Router User Manual
Defining User-defined Sources
Vega 30 Web Interface 6.5
Issue1 Revision 1
Page 71
© 2017 SAM
8.
Select ‘DestThru-3’ in the drop-down list.
This selects embedded audio channel 3 of the video input source specified for this
user-defined source.
The ‘Audio 3’ column entry is done. See Figure 47.
9.
(Click
Apply
at the top of the
Source Names
Web page
to apply settings changes
when all settings changes are done.)
6.5.3.3
To enter a De-embedded Audio Channel Source
To enter a de-embedded audio channel source, for example,
from
video crosspoint output 23:
10. Click in the “Audio 4” column and enter ‘V.In 23’.
A drop-down list appears to assist entry. See Figure 48.
11. Select ‘V.In 23-4’ in the drop-down list.
The ‘Audio 4’ column entry is done. See Figure 49.
The user-defined source’s audio channel 4 (i.e. the ‘Audio 4’ column) is now defined
to be audio channel 4 from video output 23 of the video crosspoint.
12. (Click
Apply
at the top of the
Source Names
Web page
to apply settings changes
when all settings changes are done.)
Figure 47 Audio 3 Column Entry Complete
Note:
DestThru-N
‘DestThru-N’ specifies an embedded audio channel from the user-defined source’s
associated video source.
In this example, “DestThru-3” means that embedded audio channel 3 of whichever video
source is used
Figure 48 Drop-Down ‘Auto-complete’ List
Figure 49 Audio 4 Column Entry Complete
Some ‘Auto-complete’ possibilities
Internal Test Tones and Silence audio sources