-
13
-
No.JXC
※
-OMU0030-A
3. Product Specifications
3.1 Basic specifications
The basic specifications of this controller are as follows:
Item
Specifications
Compatible motor
Unipolar winding method 2-Phase HB step motor
Power supply
*1)
Power voltage: 24 VDC +/-10%
*2)
When conformity to UL is required, use UL1310 compliant Class 2
power supply unit for direct current.
Parallel input
6 inputs (photo-coupler isolation)
Parallel output
6 outputs (photo-coupler isolation)
Stop points
Stroke ends 2 points (Position number 1 and 2),Intermediate position
12 points (Position number 3 to14(E))
(Stroke end (Position number 1 and 2) cannot be changed)
Compatible encoder
Incremental A / B phase (800 pulse / rotation)
Memory
EEPROM
LED indicator
2 of
LED’s (green and red)
7-segment LED display
*3)
1 digit, 7-segment display (red)
Figures are expressed in hexadecimal (10 to 15 in decimal number are
expressed as A to F)
Lock control
Forced-lock release terminal (Applicable to non -magnetizing lock.)
Cable length
I/O cable: 5m or less
Actuator cable: 20m or less
Cooling system
Natural air cooling
Operating temperature
range
0 to 40
o
C (No freezing)
Operating humidity range
90%RH or less (No condensation)
Storage temperature
range
-10 to 60
o
C (No freezing)
Storage humidity range
90%RH or less (No condensation)
Insulation resistance
Between external terminals and case
50M
Ω (500VDC)
Mass
130 g (screw mount type)
150 g (DIN rail mount type)
*1) Do not use the inrush current suppression type power supply for the controller power (24VDC).
*2) The power consumption changes depending on the electric actuator model.
Please refer to the specifications of the electric actuator for more details.
*3) "10" to "15" in decimal number are displayed as follows in the 7-segment LED.
Decimal display 10 11 12 13 14 15
Hexadecimal display
A b c d E F