-
42
-
No.JXC
※
-OMU0030-A
8.3 Jog operation / inching operation
Jog operation and Inching operation can be operated in manual mode.
(1) Jog operation
The electric actuator moves to the specified direction while the
button is pressed. It stops when the button is released. This
operation is available before return to origin is performed.
Procedure
1) Switch the controller mode switch (e) to manual mode (M).
2) When the Forward button (i) and Reverse button (i) are pressed
simultaneously, the inching operation starts. When the buttons
are pressed for longer than 1 second in that state, Jog operation
starts.
When this button is released, the product stops operating.
(2) Inching operation
When the button is pressed once, the electric actuator moves for a specified distance in the specified
direction and stops.The operation is available before return to origin is performed.
Procedure
1) Switch the controller mode switch (e) to manual mode.
2) Press the Forward button (i) or Reverse button (j). The electric actuator will perform the inching
operation in the specified direction and stops.
Caution
●
The driven distance and the speed when Inching, and the speed when Jog are different in each
electric actuator.
Refer to
“10. Initial setting value of electric actuator (LEM series)”
for details.
●
The driven distance and the speed when Inching, and the speed when Jog can be change by the
parameter.
Refer to
“7.3 Setting parameters”
for details.
(f) (e) (c)
(g)
(i)
(k)
(m)
(h)
(j)
(l)
(n)
Time
Stop
Jog
Stop
Stop
Jog
1 sec
1
sec. or less
Stop
Inching
1 sec
Inching
E
le
c
tr
ic
a
c
tu
a
to
r
Pushing
Reverse
button
Pushing Reverse button
Pushing Forward button