-
33
-
No.JXC
※
-OMU0030-A
(B) Setting by direct teaching (Ex. Position switch initial value [4])
Method to register the electric actuator slider position by moving the slider by hand.
The method below is an example of how to register the
position to position number 3.
1) Press the Forward button (i) and Reverse button (j)
simultaneously for 3 seconds or longer until the flashing
state of 7-segment LED changes to the on state. When
the 7-segment LED state has changed, the power supply
LED state changes from on to flashing.
The power supply LED (a) flashing indicates that
the servo is off.
2) Rotate the position switch (h) to the required position
("3" in this case).
The position number specified by the position
switch (h) is lit on the 7-segment LED (f).
“1” and ”2” are the position number for the stroke ends.
They cannot be registered for intermediate position.
“0” and “F(15)” are not position numbers. They cannot
be registered for intermediate position.
3) Keep pressing until the 7-segment LED (f) is flashing.
(a)
(j)
(f)
(i)
(f)
(h)
(f)
(g)
