-
36
-
No.JXC
※
-OMU0030-A
7.3 Setting parameters
In manual mode, it is possible to set parameters. The 3 parameters below can be set and changed.
Parameters
No.
Description of
parameters
Value and the content of parameters
1
Reference for
rotating
direction
Change the direction of the return to origin and forward and reverse
*
1)
Value
Description
1
CW
2
CCW
2
Jog speed level
Sets the speed of jog and inching operation.
Jog, inching speed
＝
(Reference value of electric actuator)×(power)
Value
Description
1
1 (Default value at the time of shipment)
2
2
3
4
4
8
3
Inching level
Sets the moving distance during the inching operation.
Inching level
＝
(Reference value per electric actuator)×(Multiplier)
Value
Description
1
1 (Default value at the time of shipment)
2
2
3
4
4
8
*1) The default value varies depending on the electric actuator.
Please refer to the manual of the electric actuator for more details.
The procedure to set the parameters is shown below.
1) Switch the controller mode switch (e) to manual mode (M).
Example: "4" (Default value of position switch)
(e)
